Friction stir welding with pp natural fibre sheets?

Fsw with natural fibre pp sheets data's and topic tips needed?

31 December 2014 1,527 1 View

Which would be the natural fiber wind mill blades?

08 September 2014 1,446 6 View

Natural fiber coating

08 September 2014 2,188 0 View

Is it possible to calculate the surface energy in CFD when working with natural fiber reinforced polymer composites?

I have already carried out the mechanical testing of sugarcane bagasse with olevera stem with epoxy resin in the form of a sheet. Now I am going to test with the same fibers in hollow tubes. I...

05 June 2014 9,049 1 View

What are the latest concepts for bio solar cell and pv cell materials in terms of storage materials?

Thanks.

01 February 2014 8,495 0 View

Natural fiber composites?

Can anyone suggest to me which natural fiber other than coconut, saisal, jute I can do my PhD for lightweight natural matrix composites compared to steel properties?

07 August 2013 5,837 27 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Why does blocking with my immunogenic peptide cause nuclear fluorescence in ICC?

Hi all, I am validating a polyclonal antibody raised against human ANT4, through WB and ICC. In most of my controls, the antibody shows very little off-target binding, but when I pre-incubate the...

03 March 2021 5,999 3 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

Irradiation data for JAPAN?

Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...

03 March 2021 961 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

No title

02 March 2021 3,060 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View