What would be the impact of deep learning on chemical industry? What are your thoughts about it?

In my openion, the chemical industry is one of the most important industries in the world. Not only do 90% of our everyday products contain chemicals, but the industry also employs approximately...

04 May 2019 1,376 3 View

What is the permeable limit of Biochemical Oxygen Demand (BOD) in wastewater discharge?

Biochemical oxygen demand (BOD) is a chemical process for determining the amount of dissolved oxygen required for aerobic biological organisms in a body of water to break down (disintegrate)...

03 April 2019 9,494 64 View

Why Deep Eutactic Solvents (DES) can not form with tetra ethyl ammonium iodide TEAI) and Glycerol?

It is known that the complexation of a quaternary ammonium salt with a metal salt or hydrogen bond donor (HBD) resulting in DES formation. The charge delocalization occurring through hydrogen...

10 November 2018 9,748 5 View

Why ionic liquids are considered as replacement for conventional organic solvents ? What are the recovery methods for regeneration of ILs after used?

Recent studies highlighted that Ionic Liquids are potential replacement for conventional organic solvents in various fields. However, their cost is the measure hindrance for their potential...

09 October 2018 7,304 6 View

How to prepare efficient deep eutectic solvents (DES) with different salts especially with Quaternary ammonium salts?

DES are often seen as green solvents, however, their chemistry and mechanism is still scarcely available. How do they posses lower melting and freezing tendencies in-comparisons to their original...

09 October 2018 1,120 7 View

What are the mechanisms of Thermodynamic and Kinetic inhibitions in gas hydrate?

When operating within a set of parameters where hydrates could be formed, there are still ways to avoid their formation. Altering the gas composition by adding chemicals can lower the hydrate...

31 December 2014 726 1 View

What is the confilicts of interest in research? And how to avoid it?

We (researchers) often find ourselves faced with two or more competing interests, creating the perception, if not the reality, of an increased risk of bias or poor judgment. Dear researchgate...

01 January 1970 5,463 30 View

What source of energy would be the most promising for the future?

Energy is one of the most important things for the human civilization to exist. We use energy for everything in the modern world. With the fast advances in technology, we are more dependent on...

01 January 1970 6,553 5 View

How can this project reduce poverty around the world?

The purpose of this project is to eliminate poverty from the whole world. However, it looks like sharing our research is the only solution to reduce poverty, which is, in my opinion, only provide...

01 January 1970 2,062 15 View

What are the most significant scientific discoveries are near? And what will be their potential impact on humanity?

Science and technology have had a major impact on society, and their impact is growing. By making life easier, science has given man the chance to pursue societal concerns such as ethics,...

01 January 1970 9,439 18 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View