I'm looking for a rule of thumb to work out the equivalent potential to CuCUSo4 if I'm using calomel reference electrode?
Hi Elsadig Eltai ,
This paper may be of use: Article Copper sulfate reference electrode
The Cu/CuSO4 RE sits ~75 mV higher than SCE.
I agree with Sam Catarelli .
Thanks Sam and Ameneh
What is the voltage where hydrogen evolution, chlorine evolution and also cathodic disbondment of coating take place if you use Calomel reference electrode?
06 July 2019 8,021 1 View
Does the resistance of the coating whether it is high or low has an impact on cathodic protection (CP) in terms of protection and shielding of CP current?
05 June 2019 2,535 8 View
Hi every one Can any one suggest a good publication or a book discussing the interactions between cathodic protection and coating in good details?
31 December 2018 3,025 3 View
I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...
02 March 2021 5,829 1 View
I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...
01 March 2021 395 3 View
I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...
27 February 2021 1,829 3 View
Dear colleagues, I have found that many authors have a concern regarding their missing citation in RG because often citation in RG is lower than google scholars. I also missed some citation...
26 February 2021 928 6 View
During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...
25 February 2021 7,994 3 View
I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...
23 February 2021 9,592 2 View
What are the testing rate for electrodes recommended by ASTM for cochlear implants. I am currently doing the 15mm/min elongatio testing.
22 February 2021 1,515 1 View
One of my colleagues said, "the impedance you can measure with the three electrodes and with the specific sequence varying the frequency" Is it possible to configure the potenciostat without the...
21 February 2021 418 2 View
Hello everyone Do you have any information about this error 'The experiment was stopped by a potential overload on Vs (auxiliary electrode)' in Origamaster software? I tried everything possible,...
19 February 2021 3,152 7 View
The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...
18 February 2021 4,430 1 View