Could anyone give me damping property of steel?

i want to analyse a part and i need to know about damping property to insert and import in material module in abaqus software. the coefficient of damping for example alpha & beta are needed to...

05 June 2017 6,263 2 View

How can i remove stress wave effects in dynamic explicit analysis?

Your toughest technical questions will likely get answered within 48 hours on ResearchGate, the professional network for scientists.

01 February 2016 9,428 0 View

How we can define in abaqus applying a specific load in very very little time?

how we can define in abaqus applying a specific load in very very little time? for example in 0.01 microsecond instantaneous or tabular amplitude did not response for this and after specific...

01 February 2016 2,434 7 View

How can we simulate wire rope in large scale(for example 10 m) in abaqus?

01 February 2015 8,329 2 View

How can I simulate a rope in Abaqus?

Suppose one side of the rope is closed and the other side is on the pulley. Force is applied to the free side of rope. How can I simulate this, since the rope does not bear shear force? Which...

31 December 2014 9,366 2 View

Can we simulate heat transfer in beam element with Abaqus?

31 December 2014 1,558 3 View

How can I solve this Abaqus error?

HI I was encountered with this problem IN ABAQUS/ATANDARD: The executable standard.exe aborted with system error code 1073741819. Please check the .dat, .msg, and .sta files for error messages if...

09 October 2014 5,471 30 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

How to improve and implement WBAN MAC and Radio modules under Castalia 3.2 ?

Hello researchers, Hello Castalia3.2 researchers I am a beginner with Castalia, I work on optimization of RFID systems used in wireless body networks. I simulated a WBAN with 10 nodes and one...

28 February 2021 400 1 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View