I want to model a rotor. it has 2 bearing to connect to the earth. in the intraction module I set bushes. but i dont khow whats its boundary condition.
it can be equal condition which is omit displacement from 2 axis and just flexural displacement can vibrate for bearing location
Hi previously, I used to use the online cap3 site to assemble the forward and reverse reads from Sanger sequencing. But unfortunately, this site currently has encountered a problem and I can't use...
28 December 2022 767 4 View
Is there a possibility in the Revit to suggest a suitable structure for the general form of the building? Such as the interior architecture field, which suggests how the devices are arranged in...
26 August 2021 7,388 1 View
Hi everyone, I'm trying to embed SecTrust into RPL routing protocol of ContikiOS, specifically to replicate the work of this paper: " SecTrust -RPL: A secure trust-aware RPL routing protocol...
03 July 2020 2,418 1 View
I need to a manual protocol for extraction dsRNA from Agarose gel. best regard
19 May 2020 6,087 3 View
we have a big problem in pistachio trees, it`s a Agonoscena pistaciae Burkhardt and Lauterer (Hem.: Aphalaridae). A. pistachiae is resistance to most of insecticide especially Neonicotinoids...
28 January 2019 5,327 23 View
I have built a vacuum oven with Autonics TZN4L-14S PID controller and SSR (SRH1 30A) as a transmitter but due to its perfect insulation, if there is a slight overshoot, its temperature won't drop....
05 November 2016 2,463 7 View
Hello, I have done some literature review and some Molecular Dynamic simulation to study rheological properties of aqueous solutions. Does anyone know any resource that I can get some information...
20 July 2016 4,852 7 View
Hello, all. I want to calculate distances between two groups of aminoacids in gromacs (residue residue distance ). I can't use g_dist or gmx distance, because I don't want calculate the distances...
15 November 2015 1,669 6 View
drilling boreholes for obtaining required data for modeling groundwater is beyond our budget. is there other ways to get required data for modeling?!
28 March 2015 3,000 8 View
We intend to test activation of a GPCR by a neuropeptide. The cell line does not seem to be commercially available.
11 September 2014 2,589 1 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
I want to know more about diamond ore deposits in world.
11 August 2024 2,167 1 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
What should be the equation for halfway bounce back boundary condition for flow field with forcing term?
08 August 2024 7,938 1 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 719 0 View
07 August 2024 7,413 0 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
I am analyzing cherts from different sources found within one specific geologic formation using ICP-MS/ES. My committee was asking this question about my analysis. I was not sure how to answer this
05 August 2024 7,902 3 View
I want to know more about REE deposits.
03 August 2024 6,930 2 View