How can I identify that the color depth of an LCD panel is 24bpp or 30bpp (bit per pixel)?

24 September 2016 0 9K Report

Is there any way to judge the color depth of an LCD panel. How can I identify that the color depth of an LCD panel is 24bpp or 30bpp (bit per pixel)

Badges
Science topic

More Muhammad Rizwan's questions See All

How combine yolo with Faster R-CNN?

I want a model that is balanced with accuracy or speed, faster rcnn has high accuracy while yolo have fast speed. i am thinking to combine them to get a hybrid model to achieve both speed and accuracy

02 August 2024 3,104 0 View

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

Addition of EDTA during the synthesis of copper nanoparticles to prevent it from being oxidized?

I've attempted to use this method to synthesize copper nanoparticles. Copper nanoparticles can be synthesised using a variety of precursor materials. CuSO4, distilled water, NaOH, and EDTA are...

28 July 2024 8,027 3 View

Can I please ask why my samples from anaerobic bioreactor giving me different size PCR product even after multiple runs?

Hi everyone, I have extracted DNA from a biogas bioreactor using Qiagen kit and prep cDNA library then used this library as template to optimize primers for qPCR (taken from papers). Some of the...

23 July 2024 1,329 5 View

Swerling Characteristic functions?

Hello!!! I want to implement the Swerling characteristics functions (CF) directly in MATLAB without using its Fourier integral pairs...the Swerling CFs are actually Laplace Transform of the signal...

23 July 2024 4,925 1 View

Radar Detection Probabilities?

Currently I need to calculate detection probabilities (PD) from RCS data. Beta distribution parameters for this RCS data are calculated and will be used in Swerling0 Equation. The idea is based on...

22 July 2024 2,851 0 View

Why methanol and sulphuric acid used in the analysis of polyhydroxyalkanoates (PHA) by GC-MS?

Why methanol and sulphuric acid, used in the analysis of polyhydroxyalkanoates (PHA) methyl esters by GC-MS? Additionally, why do we typically use non-polar solvents in GC-MS?

22 July 2024 1,210 2 View

Radar Detection Probabilities using beta distributed Scattering Cross section?

Currently I need to calculate detection probabilities (PD) from radar cross section (RCS) data. Beta distribution parameters for this RCS data are calculated and will be used in Swerling0...

22 July 2024 867 0 View

I want to buy Hydrothermal Synthesis Autoclave from any European company. Can anyone suggest any company inside Europe?

Thanks

22 July 2024 1,143 3 View

Optimal condition for depositing FTO target 95:5% using sputter technique?

Hello I want to know about the sputtering condition of depositing FTO from target 95:5%. I tried with RF sputter in pressure 2.5Pa and 100 sccm Ar at room temperature but it showing no...

21 July 2024 1,680 2 View

Can you connect an HPLC to a Mass Spec only at a certain time point?

Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...

11 August 2024 8,141 3 View

Why is electronic energy 0.000 for liquid crystal compounds and is invariable with temperature in Guassian 09 software?

Are there any suggestions or insights you can provide to help address this problem

06 August 2024 1,443 2 View

How to improve peaks separation in HPLC?

Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...

30 July 2024 435 3 View

AGILENT HPLC 1100 SERIES , any expert available please?

AGILENT HPLC 1100 SERIES operation assistance needed.

25 July 2024 10,045 2 View

I want to plot calibration curve of pure mirtazapine powder using HPLC. Can someone please suggest a method without HPLC buffer as a mobile phase?

I am searching for HPLC method to estimate Mirtazapine but i want to avoid HPLC-buffers as a mobile phase component. So, I am looking for alternative HPLC-solvent (acetonitrile, methanol etc.)...

14 July 2024 1,493 3 View

If Purospher STAR RP-18 LiChroCART (HPLC column) is suitable for amino acids?

Hi Dear Researchers, Could anyone please provide me with some information about the HPLC column, specifically the “Purospher STAR RP-18 LiChroCART Cartridge”? I would like to know if it is...

25 June 2024 9,523 1 View

Glycerol/serinol hplc separation?

Bonjour, j'ai une question si quelqu'un a une réponse. J'ai une colonne Uptisphere Strategy 100 Å Bonding HILIC-HIT avec une taille de particules de 3 µm et une longueur de 100 mm. Je n'arrive pas...

24 June 2024 7,201 1 View

Query about Liquid Crystals?

Dear Researchers, Can you please tell me that from which company we can purchase the following Liquid Crystals: HTD028200, NJU-LDn-4, 1825 ?

23 June 2024 7,757 2 View

How to interpret this sentence making a HPLC mobile phase?

I'm following a paper for their HPLC methodology, but I'm having a hard time understanding how to make mobile phase A. To quote: "Mobile phase A is a mixture containing 0.2% potassium dihydrogen...

13 June 2024 8,321 1 View

How can I implement GAFF-LCFF forcefield in GROMACS?

Dear experts, I am new to molecular dynamics and can run simulations on small Liquid crystal systems using GAFF in GROMCS. I wanted to use the GAFF-LCFF forcefield (Optimization of the GAFF Force...

11 June 2024 4,547 2 View