It depends on the substance that you added as indicator. For instance, if you use Phenolphthalein you will observe colour changed from red to white after tritation.
An alternative is to not use an indicator at all , but to titrate to an end point of pH 7. That said, you will need a pretty accurate pH meter or a titrator
Use Mixed indiactor prepared by mixing 0.1g of Bromocresol green and 0.02g Methyl red in 100 ML of 95% Ethyl Alcohol or Methanol and adjusted to 4.8 pH. The colour at the end point will be Brick Red
I quantify the CO2 produced during the carbon mineralization process trapping it as Na2CO3 by bubbling for 2 h in 2 N NaOH. After CO2_ 3 precipitation (BaCl2), the remaining NaOH is titrated against HCl 0.2N (Metrohm 736, GP Titrino,