I made a gel from matrigel in 24 well plates and wanna cut some part of it. I wonder if sb can give me some hints to do so?
Hi,
may be you can use one of the Ibidi inserts and put the gel into it then after removing the inserts you can get the gel in parts and you don't have to cut it.
check the link below
http://ibidi.com/applications/wound-healing-and-migration/
Good luck
Oh great. Many thanks, Sherif.
Hi, Does anyone have an idea for removing the Epithelial Sheets from a culture dish? Thanks in advance, Sheida
08 September 2016 7,308 8 View
I studied self diffusion of Ammonia using molecular dynamic simulation. The results showed the diffusion value of 10^-8 m2/s which is 2 or 3 order of magnitude larger than the ones reported in the...
04 May 2014 3,587 5 View
I want to study the behavior of H-ZSM5 and Cu-Zsm5 catalysts in SCR of NOx using molecular simulation. The plan is to investigate diffusion and adsorption phenomena. Is anyone familiar with this...
02 March 2014 4,387 4 View
I got these smeared bands quite often lately. We typically run the gel at 140V with a 10-12% gel and do a wet transfer at 220 mA for 1.5 hr in cold room. We also noticed some dirty spots/dots (see...
10 August 2024 7,480 3 View
Hi, I know that low molecular weight (MW) molecules generally tend to have higher mobility, while high molecular weight molecules tend to have lower mobility. However, in my experimental...
06 August 2024 1,495 2 View
I have been working on Red blood cell-derived extracellular vesicles as Antisense Oligonucleotide (ASO) carriers. We normally run agarose gel to quantify the loading efficiency. I used naked ASO...
06 August 2024 3,130 2 View
After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...
05 August 2024 9,637 2 View
I am having an issue with my gel image where my PCR product is not appearing very bright on the gel. When I perform gel extraction, the A260/280 purity value is very low. I used the Qiagen gel...
05 August 2024 9,798 3 View
kindly reply me. Thanking you in advance.
05 August 2024 7,727 4 View
I have tried several times to isolate lymphocytes from mouse spleen, but all attempts have been unsuccessful. I tried most available protocols. I used different dissociation media (HBSS with Ca...
04 August 2024 9,913 7 View
Is it possible to conduct a molecular dynamics simulation to see the effects of a specific carbohydrate on the structure of lipids (e.g., micelle structure)? I am a beginner in this field and plan...
03 August 2024 3,371 3 View
I am using a windows system, what software I should use for hydration shell analysis with molecular dynamics?
02 August 2024 3,143 4 View
Molecular docking software/ websites?
02 August 2024 8,704 7 View