I am using hose not water pipe and i want to convert the flow rate ml/min into pressure psi in simple equation
Thanks Dr. murwan
It is better to contact and then register in On lie conversion.com forums to help you of converted
What is the best pH conditions to use different coagulant FeCl3.6H2O, Al2SO4.18H2O, Fe2SO3 and AlCl3 for wastewater treatment?
31 December 2017 5,849 2 View
In my study I found different disadvantages of using nanoparticles in water and wastewater treatment such solubility, increasing TOC and difficulty of collecting after treatment I need your...
31 December 2017 1,389 30 View
Can anybody help for How to select nano particles to introduce into polymer membrane for desalination applications?
31 December 2017 3,258 4 View
The preparation of nano metal especially nano aluminium have different size according to the aluminium salt (Chloride and Sulfate), why? and Generally what is the most suitable reducing agent that...
31 December 2017 5,102 10 View
Preparation of iron using drop by drop method of reducing agent such as NaBH4 produce nano iron with zero charge increase pH to be alkaline and by using green synthesis as reducing agent produce...
31 December 2017 2,811 2 View
i want to study the effect of dose against different stirring rate and different time in the same experiment what can i do?
31 December 2017 2,366 4 View
Can anybody help for How to select nano particles to introduce into polymer membrane?
11 December 2017 9,902 0 View
I am trying to collect nano carbide FeC from aqueous solution in fast, easy and economic way
11 December 2017 143 2 View
I want to know the roles t to prepare and identify nano particles in desalination applications
11 December 2017 403 0 View
What is the mechanisms of salt rejection using entrapped nano particles into membrane?
11 December 2017 8,372 3 View
When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...
03 March 2021 4,892 5 View
We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...
03 March 2021 7,975 3 View
We found tests to determine cardiovascular risk taking into account lipid profile, blood pressure, age, history of diabetes, other laboratories. But when weight is involved, there is a paradox. I...
02 March 2021 6,036 1 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...
02 March 2021 3,309 2 View
I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...
02 March 2021 5,829 1 View
Hi, I am trying to figure out which test would be most appropriate to run for the following question: Is there a difference in task blood pressure between smokers and non-smokers? There are two...
01 March 2021 8,235 2 View
I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...
01 March 2021 6,985 3 View
Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...
26 February 2021 6,253 3 View
Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...
25 February 2021 3,292 3 View