Can anybody help for How to select nano particles to introduce into polymer membrane for desalination applications?

12 December 2017 0 10K Report

Can anybody help for How to select nano particles to introduce into polymer membrane?

Badges
Science topic

Similar topics
Chemistry
Nanotechnology
Nano

More Ahmed Said Mahmoud's questions See All

What is the best pH conditions to use different coagulant from FeCl3.6H2O, Al2SO4.18H2O, Fe2SO3 and AlCl3 for wastewater treatment?

What is the best pH conditions to use different coagulant FeCl3.6H2O, Al2SO4.18H2O, Fe2SO3 and AlCl3 for wastewater treatment?

31 December 2017 5,849 2 View

What are the disadvantages of using nanotechnology in water and wastewater treatment?

In my study I found different disadvantages of using nanoparticles in water and wastewater treatment such solubility, increasing TOC and difficulty of collecting after treatment I need your...

31 December 2017 1,389 30 View

Can anybody help for How to select nano particles to introduce into polymer membrane for desalination applications?

31 December 2017 3,258 4 View

Why the particle size for nanomaterials preparation different from chloride salts and sulfate salts? what is the best reducing agent except NaBH4?

The preparation of nano metal especially nano aluminium have different size according to the aluminium salt (Chloride and Sulfate), why? and Generally what is the most suitable reducing agent that...

31 December 2017 5,102 10 View

Preparation of iron using NaBH4 produce nano iron increase pH of solution and by using green synthesis produce nano iron decrease pH of solution Why?

Preparation of iron using drop by drop method of reducing agent such as NaBH4 produce nano iron with zero charge increase pH to be alkaline and by using green synthesis as reducing agent produce...

31 December 2017 2,811 2 View

How can I convert the flowrate ml/min into pressure psi?

I am using hose not water pipe and i want to convert the flow rate ml/min into pressure psi in simple equation

31 December 2017 7,066 3 View

How can i manage the effect of operating parameters (pH, Dose, Stirring rate, Concentration and Temperature effects) all of them at the same time?

i want to study the effect of dose against different stirring rate and different time in the same experiment what can i do?

31 December 2017 2,366 4 View

What is the best method to collect non magnetic properties nanoparticles from solutions?

I am trying to collect nano carbide FeC from aqueous solution in fast, easy and economic way

11 December 2017 143 2 View

What is the mechanisms of salt rejection using entrapped nano particles into membrane?

I want to know the roles t to prepare and identify nano particles in desalination applications

11 December 2017 403 0 View

What is the mechanisms of salt rejection using entrapped nano particles into membrane?

11 December 2017 8,372 3 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

How do I determine the degree of polymerization of PEG 400 based on NMR integration?

Hello, I am working on the photocatalytic degradation of PEG 400. I would like to know if it's possible to determine the degree on polymerization based on NMR integration, or by the MW of the...

02 March 2021 6,186 3 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

What is Nano technology with coronavirus helpe the human..and is it nano mterals removal of covid19?

I anwar by adsorption or reaction ..but it is either more method...

02 March 2021 4,811 2 View

How to compare different concentrations of nanoparticles for characterization from ICP-MS?

I took measurements of different concentrations of 15 nm and 5 nm Au nano particle solutions. I'm trying to determine which concentration I measured gives the best reading overall. I also...

02 March 2021 7,626 1 View

Discrete Phase model (DPM) particle break-up has particle size limits during particle tracking?

Hello, I am currently working on simulating water droplet partciles in a closed room. When I use uniform particles, without "particle break-up", I can carry out the simulation without any problem....

02 March 2021 3,053 2 View

Can polymer concentrations be calculated based on the number average molecular weight?

Hello, I spin-cast two different polymers onto wafers and measure their height as a function of initial concentration. For polymer A, I have the weight-average molecular weight (Mw) as well as...

28 February 2021 7,882 2 View