I know how to do that in static structural analysis

open the static structural mechanical window go to analysis setting option under static structural option  change the number of sub steps to 2 and after that select force, after selecting it, in the right there will be tabular data option there we can give different loads. I am attaching pictures for your convinience

I know how to do that in static structural analysis

open the static structural mechanical window go to analysis setting option under static structural option  change the number of sub steps to 2 and after that select force, after selecting it, in the right there will be tabular data option there we can give different loads. I am attaching pictures for your convinience

thank you @Rayudu Nithin manohar for your replay,

i got the idea but i have two different loads  first one isstatic vertical load constant and the seond one issinusoidal horizonatl displacement ? one by one for exemple i wanna apply sinusoidal horizontal displacement after 5 second from the runing analyes

i guess you can use static or transient structural.

use 2 substeps.

under analysis settings defing your time (ex:10s), min sub steps & max substeps etc.,

under analysis settings....

choose sub step 1 and define the time value for first load (say, 1 to 5 secs)

choose sub step 2 and define time interval (5 to 10 secs)

_______

while applying your loads, make sure you feed the loads in tabular form ( with respect to time)

_________