How can carbon cloth or felt be fabricated out of carbonaceous material?

17 September 2013 1 5K Report

I am interested in the methods, references, comments or ideas you can share on the fabrication of carbon cloth or felt from carbonaceous material.

Ronny Claßen

What about pyrolysis? If you have a carbonaceous felt or Cloth it should be possible to increase the amount of Carbon. IThe process shoould be like the processing of carbon fibres (You use pyrolysis for converting for example Polyacrylnitrile into carbon)

Badges
Science topic

Similar topics
Chemistry
Electrochemistry

More Hooshyar Hossini's questions See All

Can probiotics using chitosan nanoparticles for Nanoencapsulation and added to the diet?

The articles referred to the encapsulation (microencapsulation) of probiotics. Are probiotics have the potential to use the chitosan particles are nanoencapsulation?

20 June 2016 5,269 2 View

What does C:N:P mean for autotrophic bacteria?

CNP= Carbon, Nitrogen, Phosphorus or COD/Nitrate/Phosphate? but for autotrophic bacteria C or Carbon calculate from NaHCO3 or CO2 or COD? the C is determined based on? CO2, HCO3 or CaCO3?

13 September 2014 3,347 8 View

What are the best growth media for autotrophic and heterotrophic bacteria?

I have two reactors of autotrophic and heterotrophic bacteria and I want to know more about bacteria activities. I don't know what media is better for their cultivation like nutrient broth or...

14 June 2014 3,025 4 View

Determination of hydrophobic and hydrophilic characteristics in a matter?

For example I want to know if a plastic, textile or media is hydrophobic or hydrophilic? How many hydrophobic or hydrophilic in term of its scale (percentage, rate, etc.)?

30 April 2014 5,082 6 View

What factors can affect redox (ORP)?

In wastewater treatment redox can be changed due to physical, chemical and biological agents.

17 April 2014 8,621 4 View

What is different between contentious flow and semi-continuous?

I should be grateful if hep me anyone by figure or documented file.

08 March 2014 1,351 5 View

What do you think about Aeration and pH increases?

I've seen an increase in pH during the aeration of ammonia content effluent. Can anyone tell me about this?

25 February 2014 786 33 View

What is the optimum C:N:P ratio of aerobic and anaerobic and what are the basics?

For example: for aerobic it is about 100: 5: 1. Why these amounts?

09 September 2013 1,978 7 View

What is a good way to calculate the current density for electrocoagulation process?

The anode and cathode surfaces are considered or just the anode?

19 July 2013 568 10 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Geotechnical Engineering (Proceedings of the ICE) time review?

Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...

10 August 2024 6,493 1 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Weak DAPI staining after immunohistochemistry - how to improve?

After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...

05 August 2024 9,637 2 View

Why might the impedance values for DI water and 0.1X PBS buffer solution exhibit a decreasing and increasing trend, respectively over time (HP 4194A)?

Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...

05 August 2024 3,783 2 View

How to isolate lymphocytes from mouse spleen?

I have tried several times to isolate lymphocytes from mouse spleen, but all attempts have been unsuccessful. I tried most available protocols. I used different dissociation media (HBSS with Ca...

04 August 2024 9,913 7 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View