Hi im doing project on cold isostatic pressing. The main problem in this project is to get net shaping after compaction. how to get net shaping?

Kamalashwaran Sivasubaramanian @Kamalashwaran_Sivasubaramanian

10 October 2015 0 9K Report

After pressing in Cold Isostatic pressing the Compacted part is not in Exact shape, there is some reduction in size of compacted powder.

How to eliminate this problems..

Badges
Science topic

More Kamalashwaran Sivasubaramanian's questions See All

Why faceted grains form in wc? Is there any way to obtain spheroidal WC grains?

Even though WC powder particles are spheroidal. After sintering faceted WC grains are obtained...what is the reason behind this formation of faceted grains. Is there any possible way to obtain...

31 December 2015 260 9 View

In Wc-Co system, Co doesnt show grain boundaries under microscope. Does it show grain boundaries? What is the etchant that can be used for this?

31 December 2015 9,506 2 View

How to characterize graphite from graphene using raman spectra?

Raman spectra

09 October 2015 8,307 1 View

Will reduction in grain size within hallpetch range can increase toughness and strength in all metallic alloys?

or reduction in grain size increases toughness and strength only in steels?

07 August 2015 1,188 4 View

What is the status of bread making and more bakery foods with the use of insect flour/powder?

Insects have been consumed by human diet since prehistoric times. At present, the idea of looking at insects as food has been getting traction worldwide, also in response to increasing food...

03 March 2021 6,223 5 View

How to grow E.coli on the low salt LB agar plate with 50 or 100ug/ml of Blasticidin?

Hello, I would like to ask how to grow E.coli which resists 50 or 100ug/ml of Blasticidin. I have tried many methods by using low salt Luria-Bertain(LB) agar plate. However, no colonies grow. Let...

01 March 2021 2,027 2 View

Have anyone checked before Cyclic voltammograms of intial ITO substrate and E-teck?

As a beginner in electrochemistry, I tried to obtain cyclic voltamograms of commercial anatase powder deposited on an ITO substrate or on Eteck. After several attempts, I noticed that my cyclic...

23 February 2021 3,175 3 View

How to reduce static electricity of powder after lyophilization?

I am working on synthesizing and then purifying peptides using the SPPS system. After purification of the peptide, the peptide powder is obtained using a freeze dryer. When measuring the powder,...

22 February 2021 10,099 5 View

What kind of steel moulds are used for hot pressing metal powders?

My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...

22 February 2021 2,965 4 View

How to Study a proton NMR of Graphene prepared by Electrochemical Exfoliation technique?

I performed a Proton NMR of graphene powder prepared by electrochemical exfoliation technique. It shows some peaks. But I can't understand it.

21 February 2021 8,947 3 View

Are ZnS nanoparticles moisture sensitive?

Hello Everyone, I tried to form ZnS nanoparticles using the hot injection method and was able to form the same (confirmed by XRD). When I centrifuged, after the reaction I got a kind of white...

17 February 2021 1,709 3 View

What are damage parameters for SMA while modelling on ABAQUS 2020?

I have given Elastic and Superelastic material properties, but I think we need to provide the damage parameters also. Please help me here.

16 February 2021 8,694 1 View

How does a freeze dryer destruct your solid sample?

Several times I lost my sample during freeze drying. There was no solid or powder in the vial after freeze drying. I'm sure sample contained solute because i took its NMR spectrum. I covered the...

15 February 2021 6,749 2 View

Do you know of an informal caregiver of a person who has recently received a bone marrow transplant?

We are conducting a pilot study of an intervention for informal caregivers of persons who have recently received a bone marrow transplant in the US. If you know of anyone who might be interested,...

13 February 2021 9,174 1 View