To plot the contour plot first, you need to have wind data. If you already have measured wind data, you can use surfer. If you don't have the data, you can also get them from https://globalwindatlas.info/.

You can also check this link for further help. https://www.ncl.ucar.edu/Applications/BasicExamples/Contour/cn14.shtml

The NASA meteorological website and the power project (https://power.larc.nasa.gov/) can execute such plots

Thanks Mohamed. Let me check it up

You can also try the following database website:

https://globalwindatlas.info

If you have data you can try Surfer (https://www.goldensoftware.com/products/surfer) or Rstudio.

The map is a two dimensional contour plot. The plot is made on the map of the study area using blanking technique. You can produce this contour plot using Surfer Software as suggested by @Olczak or with GIS software.

I hope this suggestion will be helpful.

To plot the contour plot first, you need to have wind data. If you already have measured wind data, you can use surfer. If you don't have the data, you can also get them from https://globalwindatlas.info/.

You can also check this link for further help. https://www.ncl.ucar.edu/Applications/BasicExamples/Contour/cn14.shtml

All people explain very well,