Have you ever implemented HEC-RTS model?

More Dayal Buddika Wijayarathne's questions See All

Can anyone suggest me why GO(graphite oxide) shows a XRD peak arround 26 degree Bragg position along with the main GO peak of 11?

Following the Modified Hummers method we have tried to prepare GO from natural graphite flakes. But we found two Bragg peaks ~11 and ~26 in XRD. It seems some graphite has not undergone to oxidize...

20 March 2023 7,264 6 View

Is there cheap way to reduce the FFA in tallow?

Im at an internship and the manger wants to lower the FFA levels but doesn't want to spend any money.

15 December 2021 8,859 4 View

How can I calculate CBM and VBM using absolute electronegativity theory of rGO-TiO2 nanocomposite material??

I saw so many research paper calculated CBM and VBM using electronegativity theory but none of them clearly specify.

24 May 2021 1,073 4 View

How can I calculate CBM and VBM using absolute electronegativity of Fe/MgO?

Dear Professor, Greetings, I synthesized a sample with a little concentration of Fe about 0.03 mmol Fe(NO3)3.9H2O with 1mmol of Mg(NO3)3.6H2O hydrothermaly where Fe do not change the structure of...

21 May 2021 3,690 0 View

Why discharge capacity of graphite anode half coin cell incrased ?

Hi, Why the discharge capacity of graphite anode incrased from cycle 1 to cycle 4 (C/10 formation cycles)?

26 August 2019 8,313 3 View

Why Open circuit potential of half coin cell chnaged before and after formation cycles?

I assembeled half coin cells with graphite anode and lithium chip. The OCV of coin cell as assembeled was around 2 - 2.5 V (data based on more than 10 cells) and after fortmation cycles (3 cycles...

21 August 2019 6,704 2 View

Filtering methods for spatial verification of radar QPEs?

I am just wondering what are the available neighbourhood methods and scale separation methods for spatial verification of radar data?

26 March 2019 4,811 0 View

What are the best methods/statistics that can be used to compare spatially distributed precipitation products such as radar precipitation products?

Apart from conventional statistics, are there any other spatial statistics?

15 March 2019 9,940 2 View

I am trying GSAS for Rietveld analysis, but I am not able to refine with chi^2 below 10 with any space group

For manganites

12 September 2013 918 1 View

Radiation-sensitive cells?

I am looking for cell lines sensitive to irradiation (X-rays) to use as a control. Does anyone have any experience in working with cells that 'die readily' and show signs of apoptosis upon...

26 August 2013 9,941 3 View

AUX gas reading problem on QE with full MS and PRM method in one run?

Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...

06 August 2024 4,953 0 View

People weight in Oaxaca Blinder Decomposition on R?

Hello guys! Do you have experience running a Oaxaca-Blinder decomposition on R applying person weights. How do you suggest doing it? I have a variable PERWT which gives more information on how...

04 August 2024 6,033 0 View

How to perform EEG source analysis on each trial of data separately?

Hello Everyone I have a question about structure for connectivity analysis on sources. My goal: preprocess and cut data into trials create headmodels, using template MRI file perform source...

30 July 2024 2,744 1 View

How to add Cr parameter in autodock?

When I run autogrid4 it says: autogrid4: ERROR: Unknown receptor type: "Cr" -- Add parameters for it to the parameter library first! Look forward to your reply.Thank you so much!

29 July 2024 488 0 View

Why running a restart analysis in Abaqus in Ubuntu OS gives an error as attached when running the same job in Windows doesn't give any error and runs?

I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...

29 July 2024 9,572 3 View

How to use Desmond in HPC ?

Our department has recently acquired an HPC (High-Performance Computing) system, and I'm thrilled to take my molecular dynamics calculations to the next level using Desmond. I used to run my...

28 July 2024 6,553 1 View

How do I run a dead well test for a QuantStudio 5 qPCR machine?

I am preparing to run a lot of samples on a 384 well plate and I wanted to test if any well in my PCR machine is dead so as not to lose any data. I would really appreciate help with how I can do...

24 July 2024 8,172 1 View

VECM Model: Positive/insignificant CointEq1 ?

Hello everyone, I am conducting

22 July 2024 8,085 11 View

Merge Intensity Data from 2 runs?

Hi, We have collected several images for two independent runs of an experiment using two different confocal microscopes and settings. Thus, the intensity values collected through ImageJ were...

22 July 2024 8,722 0 View

What is the solvent system required to run tlc for calixarenes?

If you don't understand my question let me know

21 July 2024 563 1 View