How to remove the KOH from ethanolic etherification without using extraction method?

Etherification was carried out between aromatic -OH group and alkyl chloride in the presence of ethanolic KOH. The precursor is a bulky dye compound that consists of an aromatic -OH group and an...

04 May 2019 2,639 4 View

Why this polymeric DSC have three peaks and no dip?

The sample is polymer and I sent this sample for analysis. The obtained DSC curve was kind of unexpected. The curve looks different from what I have studied and seen before. 1. Why the glass...

31 December 2017 8,521 9 View

Is it possible to get the higher molecular weight(Mw) first before getting the lower Mw during the Soxhlet extraction of the polymer?

I tried to extract the polymer through Soxhlet extraction. According to some references, the sequence for the organic solvents is methanol, acetone, hexane, toluene, and chloroform. The...

11 December 2017 4,920 3 View

Can I use cellulose Soxhlet thimble instead of glass fibre thimble for the Soxhlet extraction in polymerization?

I read that most previous studies used glass fibre thimble instead of the cellulose thimble. The solvents are methanol, acetone, hexane, toluene, dichloromethane, chloroform. If I use cellulose...

04 May 2017 1,408 3 View

Why the entire FTIR spectrum shifted to the left after dimerization?

01 February 2017 9,964 3 View

How can I get freshly powdered KOH from commercially bought KOH pallets?

The KOH absorb atmospheric moisture quite fast when I manually powdered it.

01 February 2017 3,914 4 View

Which is the suitable NMR solvent for compound that does not dissolve in DMSO-d6 and CDCl3?

I would like to scan NMR for a compound name : 4,4'-dibromo-2,2'-diaminobiphenyl. According to some papers, the NMR solvents used are either CDCl3 or DMSO-d6. However, when I try to dissolve my...

31 December 2016 2,950 10 View

What is the purpose of adding HBr in bromination? Hbr/Br2 system.

Is the HBr was added to prevent the formation of HBr as by-product from Br2 during the reaction (minimize the wastage of Br2)? And to move the reaction forwards faster?

11 December 2016 4,878 7 View

Why DMSO is used even though the compounds are soluble in DMF?

I get to know that the solvent DMF is technically similar to the DMSO for organic synthesis, just that DMSO can dissolve more compounds than the DMF. Is there any special reason that DMSO is used...

10 November 2016 6,668 7 View

Can the commercial reusable dry ice packs be used as dry ice in my experiment?

I have a few packs of reusable dry ice-gel packs. They are sent along with the chemicals in a box for keeping the chemicals cool. Is it possible for me to use that "gel" as dry ice to reach the...

09 October 2016 9,004 5 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

What solvent can I used for Paal Knorr reaction between 6-amino hexanoic acid and 2.5 hexanedione?

I am try to make the Paal Knorr reaction between 2.5 hexnedione and 6-amino hexanoic acid, my problem is type of solvent to use, because 6-hexaminohexanoic acid is soluble in water but I am not...

02 March 2021 4,443 2 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

How can extract ciprofloxacin hydrochloride disolve in water er to organic solvent such as dichloromethan or any other solvent?

I need a procedure to extract the ciprofloxacin hydrochloride from aqueous solution by using dichloromethane in detail,. I thank you very much.

01 March 2021 4,306 1 View

How to separate water from glycerol solvent in a solvent recovery vacuum distillation column?

I am currently doing my third year design project. I have been assigned to design a glycerol recovery column in vinyl acetate monomer production. The process unit before the recovery column is an...

01 March 2021 9,525 4 View

How to make fractions of chloroform extract of plant, using seperating funnel?

28 February 2021 8,466 2 View

Why am i not getting solid after reacting APTES with salicylaldehyde?

The reaction of APTES with salicylaldehyde in ethanol leads to the formation of imine compound yellow solid which is mention in literature, but I am not getting yellow solid I don't know why? when...

28 February 2021 2,955 2 View

can I treat waste water containing solvents and alcohol with electrocoagulation?

there are solvents and alcohol in the waste water of a factory that produces disinfectants. Increasing this waste water requires very serious operations. Can I treat this waste water with...

27 February 2021 2,609 3 View

How to replicate the well conditions of a crystal hit with 20%(w/v) isopropanol?

I had a crystal hit in a well with 0.1M HEPEs pH 7.5, 10%(w/v) PEG 4000, and 20%(w/v) isopropanol. Why is isopropanol in w/v here if it's just solvent? How do I recreate this well condition?

25 February 2021 9,761 1 View

How to increase solubility of Poly acrylic acid in Dioxane solvent?

I am working with Polyacrylic acid (100.000Da) and instead of water, I need to use another solvent (dioxane) to dissolve PAA. However, because of the high molecular weight, it's quite hard to...

25 February 2021 2,225 5 View