Endogenous and Exogenous Exergy Destruction?

Muhammad Haris Hamayun @Muhammad-Haris-Hamayun

07 August 2019 1 3K Report

Procedure required to calculate both forms of exergy destruction. I have simulated a plant on real, unavoidable and theroatical conditions, but unable to do the said exergy destruction..

Suryadimal Suryadimal

Exergy analysis involves the application of exergy concepts, balances, and efficiencies to evaluate and improve energy and other systems and processes.So you must to arrance or tabulated of every element that relation and do balance energy of system .

Badges
Science topic

More Muhammad Haris Hamayun's questions See All

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

Exergy destruction mathematical calculation in kW?

somebody, please elaborate on how to calculate exergy destruction in kW units. from Aspen HYSYS I found mass exergy with kJ/kg unit and i don't know how to calculate it by using Aspen HYSYS and if...

25 November 2020 2,675 3 View

Can we have the exergy analysis of a process using fluent software?

For example investigating the entropy generation number or entropy generation through heat and mass flow

10 October 2020 4,540 4 View

Fuel and product exergy rates ?

How to write the fuel and product exergy balances in the cascade heat exchanger in the cascade refrigeration system?

22 September 2020 1,954 4 View

Are exergy and exergoeconomic analysis actually used in industries and their R&D departments ? Are there engineers paid to perform such analysis ?

I am wondering whether exergy analysis is really used within a commercial/industrial framework either to develop or to analyse a product or a process.

24 February 2020 7,346 4 View

How to compute chemical potential of any species from Fluent?

I am studying exergy analysis for a combustion system for which equations containing chemical potential, derivative of mass fraction of species, net production rate etc are to be solved as...

01 February 2020 2,236 3 View

Exergy Analysis formula for three different cases of distillation column?

1. Above ambient conditions 2. Below ambient conditions 3. One of condenser/re-boiler below ambient

21 January 2020 7,239 2 View

How to carry out exergy analysis for solar assisted desiccant cooling systems?

Simulation of desiccant cooling systems.

01 November 2019 6,120 4 View

How we can do the energy and exergy analysis of a VFD compressor based heat pump system?

Since the instantaneous values of the compressor power requirement, pressure and temperature values at various locations of the circuit, and mass flow rate are highly fluctuating during the...

07 August 2019 3,360 2 View

Exergy Analysis of Distillation?

How exergy analysis of simple (non-cryogenic) distillation column is different from exergy analysis of cryogenic distillation column? If possible, can anyone of the experts provide me equations?

03 April 2019 4,311 4 View

If a combined cycle(brayton&ORC) coupled with solar system then what is mathematical relation which show exergy efficiency variation with radiation?

if a combined cycle (brayton & ORC)coupled with the solar parabolic through collector it means its taking heat from the solar system. Then what is mathematical relation to put in EES which...

20 March 2019 4,277 2 View