Can the Dual-mode model (DMM) be used for the sorption of organic compounds to carbon-based materials (e.g., activated carbon), or is it only used for interfering with the sorption of polymer-based sorbents?
There are contradictory research papers about the correlation between meteorological parameters and incidence of COVID-19 in some countries worldwide. Is there correlation between the...
15 February 2021 5,806 2 View
I submitted a manuscript to a journal (Published by Springer), they sent back for technical corrections. After the suggested corrections, they sent to reviewers. One of the reviewers accepted...
23 September 2020 3,668 3 View
I am a research scholar and working on conformal antennas, as an expert on antennas which type of material you suggest for me to use . It will be very helpful for my research
29 April 2020 9,642 5 View
I have a 2 x 3 repeated measures design with significant interaction, and I used LSD as a post hoc for the interaction but it does not adjustment the alpha. Which correction would be the most...
05 March 2020 4,301 3 View
I used freeze dryer for drying and reaching to a powder of chitosan nanoparticles. After finishing the process of freeze drying, when the nanoparticles contact with the air, they started to...
06 August 2019 6,371 7 View
07 December 2018 8,516 1 View
working on nanocomposites for emi shielding in radio blackout.
10 September 2018 1,778 3 View
Can anyone introduce to me a good conference for Traders and business. Specificly for academic purpose. Especially in my field of study.
03 August 2018 2,247 2 View
10 September 2016 3,559 2 View
12 April 2016 3,526 8 View
I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...
03 March 2021 3,661 2 View
Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...
01 March 2021 8,766 3 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...
26 February 2021 10,014 3 View
Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...
25 February 2021 3,292 3 View
For example in one research article the Elemental analysis values of COF-TpPa-1 ( Triformylphloroglucinol (Tp) (63 mg, 0.3 mmol), Paraphenylenediamine (Pa-1) (48 mg, 0.45 mmol) are as follows...
24 February 2021 1,265 6 View
Respected Professor's i hope you are doing well and happy. i need some information about carbon Nanotubes. before blending the CNT with the matrix the CNT has been introducing in some treatments....
24 February 2021 5,383 5 View
24 February 2021 1,005 1 View
I need to clean the hydrocarbon contamination on the carbon substrate of TEM grid. However, I heard that substrate could be broken by the powerful plasma. My substrate is pure carbon, with ~3nm,...
23 February 2021 3,262 5 View