How to publish M.A. Dissertation in CARE Listed Journal?

Do i need to summarize my M.A. Dissertation in short as an article/research paper (3000-5000 Words) Do i have to paraphrase all my work and reproduce it Do i need to give my own reference? and...

30 November 2019 1,917 3 View

What statistical tools should i use for the given objectives?

Proposed Title of my PhD is "A Critical Study of Health Schemes Implemented by Government of Maharashtra with Special Reference to Janani Suraksha Yojana (JSY), Janani Shishu Suraksha Karyakaram...

21 October 2019 9,624 4 View

Effective protocol for carboxymethyl cellulose resin preparation (with its sodium salt) for IEX?

Unable to find a suitable protocol for preparing CMC for IEX

03 January 2019 5,508 1 View

How to get the response of a Viscoelastic material modelled in Abaqus at a particular temperature ?

Hello All, I have modelled asphalt in Abaqus using the linear viscoelastic theory in abaqus considering the shear relaxation modulus, the WLF factors and the reference temperature equal to 21...

15 June 2018 3,490 3 View

How can be initial conditions of displacement, velocity and acceleration provided in abaqus?

Hello, everyone! I'm trying to do dynamic analysis in abaqus. I want to provide initial conditions of displacement, velocity and acceleration for all nodes and all degrees of freedom, but I can't...

29 May 2018 7,421 11 View

How can i predict future Land use Land cover changes using GIS?

How can i predict future Land use Land cover changes using GIS?

27 February 2018 9,069 16 View

How to calculate average length in an image with a wide distribution of rod like structures?

I have images with numerous rod like structures and I need to calculate the average length of the rods. I am trying ImageJ to measure them manually but the data set is huge. Any suggestions?

23 May 2014 361 5 View

Typically, how do hysterisis and eddy current losses in AC induction motors compare with copper/winding losses?

I am using FEMM to see how the losses in a motor change when different soft magnetic materials are used for the stator/rotor laminations. My simulation showed that the no-load losses (hysteresis,...

16 March 2014 1,927 3 View

How can I prevent a copper thin film from de-wetting from my substrate at high temperatures?

In my experiments, I am directly pyrolyzing photoresist (PR) in an inert or reducing gas to form a C film. I have deposited Cu via thermal evaporation (50 or 300 nm), before spin-coating the PR in...

27 February 2014 7,701 6 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View