Especially the relation between sp3-content and graphitization temperature is interesting. I only know only one publication on this topic: G. Davies, T. Evans. Proc. R. Soc. London, 328 (1972), 413. Another suggestion would be helpfull.
Subject is old and well studied, I recommend studying it from the Raman spectrodcopy point of view. You can try for example:
The classical paper of Ferrari:
http://journals.aps.org/prb/abstract/10.1103/PhysRevB.61.14095
Bernard studies the relationship with temperature:
http://www.sciencedirect.com/science/article/pii/S0008622310001892
Time and temperature-dependent changes in the structural properties of tetrahedral amorphous carbon films
B.K Tay; D Sheeja; S.P Lau; X Shi; B.C Seet; Y.C Yeo
and more: http://booksc.org/s/?q=graphitization+temperature+tetrahedral+amorphous+carbon&t=0
An excellent book about the subject; Tribology of Diamond-Like Carbon Films;
http://books.google.com/books?id=0wM-8aawgoEC&pg=PA192&dq=graphitization+temperature+of+tetrahedral+amorphous+carbon&hl=en&sa=X&ei=Kxk0VLuME8epyAT254GoBw&ved=0CC0Q6AEwAA#v=onepage&q=graphitization%20temperature%20of%20tetrahedral%20amorphous%20carbon&f=false
Thanks for your help. Some of your answers were helpfull!
A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...
11 August 2024 9,801 2 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,291 2 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
I am Looking for a Science Journal with good impact factor and low publication cost to publish a review paper. Your suggestions would be appreciated.
06 August 2024 6,796 3 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
How can I measure the thickness of thin film by Uv-Vis?
06 August 2024 7,810 3 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View