Does anyone have FTIR absorption spectrum of Si3N4 nanostructure to compare mine that prepared by magnetron sputtering?

More Oday Hammadi's questions See All

I need for the FTIR of silicon antimonide thin films?

Silicon antimonide thin films

04 May 2017 5,633 0 View

Object 15cm to left of thin convex lens of f=10cm and a convex mirror of R=10cm is 25cm to right of lens. Where eye must be to see the formed image?

Problem on Optics

11 December 2012 1,174 1 View

How can I measure the admittance of a nanostructured bulk in an aqeuous environment?

Admittance of nanstructures

11 December 2012 8,259 0 View

When finishing this academic year, you will need to support your assessment form with some achievements and activities you may forget now!!!

Every year, when finishing the academic season and working to fill the annual assessment form, we find some items are so easy and available but do not satisfy them because we forgot to do or...

01 January 1970 2,823 3 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

Can a semi-conductor material have different absorption coefficient?

Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...

23 February 2021 9,799 4 View

How can I simulate the optical absorption spectrum of a biomaterial (like DNA or protein) in COMSOL?

I need to simulate the optical properties of a biomaterial, namely DNA, in COMSOL. Basically I need to simulate the IR absorption spectrum of a cylinder filled with a 'concentration' of DNA. I am...

21 February 2021 3,043 3 View

absorption= 1-mag(S(FP1:1,FP1:1)S(FP1:1,FP1:1))-mag(S(FP2:1,FP1:1)S(FP2:1,FP1:1)) is it correct for absorption ?

hi everyone I am simulating a unit cell structure in HFSS using Flouquet port having two modes for absorption I have used this formula:- absorption=...

17 February 2021 9,178 2 View

How to detect uv vis spectrum of nanoparticle under 300nm?

I try to make the indium nanoparticle and check the uv vis spectrum. I heard that In nanoparticle has surface plasmon resonance peak at 200~300nm. But most of solvent has absorption peak under...

14 February 2021 6,950 15 View

Can anyone pls provide me information regarding the libraries where from i can get the absorption data of different materials used in solar cells??

I want to create .abs file ( absorption) for simulating solar cell in SCAPS. Can anyone pls provide me information regarding the libraries (websites) where from i can get the absorption data of...

10 February 2021 6,034 7 View