I'm looking for a review paper covering recent experiments in applications of vertically aligned patterned nanotubes.
Dear James,
Please go through the links for reviews on alligned CNTs
10.1016/j.mser.2005.04.002
10.1007/978-3-642-31960-0_7
10.1021/am402942q
10.3762/bjnano.4.14
I hope these information will be useful to you.
Best wishes
Our recent paper (below) showed that vertically aligned nanotubes at high density are crucial for increasing SWNT photovoltaic efficiency due to the higher exciton collection efficiency.
dx.doi.org/10.1039/C4EE01765J
The following code (see 1st 2 images attached) is used to produce PID controller values that are designed to control the system (G). The code finds the PID controller values (noted as k) by using...
28 February 2021 6,560 14 View
My real system (buck converter) can only take an input of 0 to 1 (duty ratio) and I need to constrain the system so the controller action keeps within this bounds. How can I do this? The code for...
22 February 2021 2,125 3 View
Colleagues and I are about to begin a project investigating the role of town planners and local authorities in establishing the introduction of connected and autonomous vehicles (CAVs). What...
21 February 2021 2,247 3 View
[Images are attached at bottom] I am currently working on a buck converter controlled by two different control methods, Reinforcement learning applied to find PID values & a lead-lag...
16 February 2021 5,060 10 View
Dear colleagues, I am running a regression in which I have the following regression FoodExp = 67.04 DepRatio +.....e My interest is in the interpretation of the coefficient on the dependency...
16 February 2021 2,058 2 View
I currently using FACS (Aurora Cytek) to quantify necrotic Gr1+ cell death from the spleens of immune competent mice. I target Gr1+ cells in the spleens of tumor-bearing mice using a photodynamic...
08 February 2021 733 6 View
Over the last year, when I have clicked on 'View the Request' in the notifying e-mail for a full text request, I have been taken to the paper in question but there is no request visible and thus I...
16 January 2021 7,558 1 View
Hello, I am a quality control chemist and I test raw materials for a nutritional supplement company. I make heavy use of FTIR-ATR for identification. We are a small laboratory with a limited...
07 January 2021 8,850 2 View
I am conducting a logistic regression in order to examine whether there is an interaction between the number of stressors participants were currently experiencing (between 0-9) and their current...
20 December 2020 1,043 9 View
Hello! I am growing transfected cells in 24 well plate. on the bottom of each well i have a small glass cover-slip. so the cells adhere to that cover slip. I am using this method because its very...
15 December 2020 7,121 3 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...
26 February 2021 10,014 3 View
I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...
26 February 2021 8,183 3 View
Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...
25 February 2021 3,292 3 View
Respected Professor's i hope you are doing well and happy. i need some information about carbon Nanotubes. before blending the CNT with the matrix the CNT has been introducing in some treatments....
24 February 2021 5,383 5 View
I need to clean the hydrocarbon contamination on the carbon substrate of TEM grid. However, I heard that substrate could be broken by the powerful plasma. My substrate is pure carbon, with ~3nm,...
23 February 2021 3,262 5 View
Hi, me and my team mates are currently planning to pursue the topic of Activated Carbon from Coconut as a Water Filter. And we would like to ask for your suggestions and knowledge on what specific...
22 February 2021 6,569 3 View
21 February 2021 7,561 4 View
I would like to ask what other properties of water (pH and such) shall be analyzed and evaluated to test the effectiveness of activated carbon from filtering the contaminants present in the water?
20 February 2021 9,422 8 View