Do you want to know the surface IR characteristics of these compounds or the IR data for bulk ones ? You probably know that these oxides will probably give spectra only in the far-IR range.
Ya Sir.. I know that these oxides will give the IR spectra below 400 Cm-1 .. But I would like to see the spectrum from 4000-400 Cm-1 (even if it is below 400 do send me).
Journal of Colloid and Interface Science, volume 383, Issue 1, 1 October 2012, Pages 75-81
Porous CuO superstructure: Precursor-mediated fabrication, gas sensing and photocatalytic properties
Xu, H., Zhu, G., Zheng, D., Xi, C., Xu, X., Shen, X.
Integrated Ferroelectrics, Volume 129, Issue 1, 2011, Pages 25-29
9th Chinese International Nanoscience and Technology Symposium and the Nano-Products Exposition; Xian; China; 15 November 2010 through 19 November 2010; Code 88910
Synthesis and characterization of porous CuO nanorods (Conference Paper)
Xu, H. , Huang, J. , Chen, Y.
Rengong Jingti Xuebao/Journal of Synthetic Crystals, Volume 38, Issue 3, June 2009, Pages 738-741
Nanopowder CuO prepared from the precursor synthesized by solid state reaction under microwave irradiation
Peng, Y.-X.ab , Liu, S.-J.a
Vacuum, Volume 83, Issue 6, 12 February 2009, Pages 927-930
Controlled growth and characteristics of single-phase Cu2O and CuO films by pulsed laser deposition
Chen, A., Long, H., Li, X., Li, Y., Yang, G. , Lu, P.
Dear Satish, I think will not be too much absorption betwen 4000 and 4000, evenif it is, only below 5-600 cm-1.
Have you checked the Atlas for FTIR spectra from Aldrich ? That contains the FT-IR spectra between 10-4000 cm1 for all the compounds marketed by Aldrich.
Thanks a lot for ur references..But I need the remaining compounds spectra.. The e-book of Atlas FTIR spectra is not available Sir.. I tried..
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Materials Science
- Materials Chemistry