Our HPLC is down,
And we are trying to find another analytical method for measuring Lactic acid.
Trinity Lactate Reagent 10x10 ml, #735-10. Try this.
http://www.trinitybiotech.com/ClinicalChemistry/Pages/ProductDetails.aspx?ProductNumber=735-10&Filter=*735-10*
Hi there,
You can also have a go with the Sigma kit:
http://www.sigmaaldrich.com/content/dam/sigma-aldrich/docs/Sigma/Bulletin/1/mak064bul.pdf
Hi,
Here is a colorimetric method you can use !
http://www.sciencedirect.com/science/article/pii/S2215016114000156
Best,
capillary electrophoresis
I do lactic malic fumaric succinic citric and tartaric acid via GC by making isopropyl esters.
I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...
28 February 2021 298 3 View
I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...
25 February 2021 2,615 3 View
My baseline increases without any explanation, it is only fixed by changing the solution B, will it be the column? Reagents? Bomb? Detector? Solution A: H3PO4 0.01% IN WATER Solution B: H3PO4...
21 February 2021 5,656 3 View
I've got this 5 year Direct Normal Irradiance data I downloaded from https://re.jrc.ec.europa.eu/. I ordered this by year and by every 24 hours because I need the DNI curve by max in summer, min...
17 February 2021 2,777 5 View
Hello everyone I would like to improve the buffer capacity of seawater (pH ~8) in order to dissolve as much CO2 as possible without dropping the pH below 7.5 (a range between 7 - 7.5 is...
17 February 2021 2,797 2 View
I am looking for a copy of the resume book of UEP2013 Asian Edition (Urban Environmental Pollution 2013 Asian Edition) held in Beijing. If somebody has it, please I would like to obtain an...
11 February 2021 2,247 2 View
Since with the pandemic it doesn't look like we are going back to the lab soon, in my lab we were looking for solutions to conduct remote webcam-based eye-tracking. I've been looking at...
31 January 2021 7,315 5 View
Surely they will want to avoid contact with air/moisture, so what is the procedure for this?
23 January 2021 428 2 View
I need information concerning the penetration and reflection capacity of ultraviolet and infrared radiation wavelengths on different most common materials. Edit. Can somebody recommend a book to...
16 January 2021 8,051 6 View
im looking for a diy at home (home lab) molecular magnet in a chemical suspension that is stable at room temperatures and cheap
30 December 2020 626 1 View
I am try to make the Paal Knorr reaction between 2.5 hexnedione and 6-amino hexanoic acid, my problem is type of solvent to use, because 6-hexaminohexanoic acid is soluble in water but I am not...
02 March 2021 4,443 2 View
Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...
01 March 2021 2,622 3 View
Also when RHAMM binds hyaluronic acid, they get internalized, will RHAMM also be degraded? Or both CD44 and RHAMM will be transferred back to the cell membrane? Asking for breast cancer cell line...
01 March 2021 8,169 2 View
We have always used the 96 welled plate, the 48 welled plate but apparently there is much evidence on the 24 welled plate and above all its benefits.It states it is the same you would use on ELISA...
28 February 2021 1,149 1 View
based on what I've studied on multiple papers, for peptide and protein identification Alpha-cyano-4-hydroxycinnamic acid (CHCA) is an appropriate matrix to use, I also know that the CHCA powder...
26 February 2021 6,799 3 View
If I want to compare characteristics of 2 groups of patients, one group is recruited from a random sample of the general public while another group is from a sample with a fixed gender (male to...
26 February 2021 3,526 3 View
Hello, I fit a classical dose response curve Y=Bottom + (Top-Bottom)/(1+10^((LogEC-X)*HillSlope)) to my data (not related to inhibitors etc). The model I use is purely qualitative but it fits...
23 February 2021 8,155 5 View
Hi! I would want to know if I can use acetic acid with an ELITE WAX Perkin Elmer column for Gas Chromatography. This column has a polyethylene glycol phase, but I can't find the manual to check...
22 February 2021 730 2 View
I have a fixed sample and would like to use the murexide reaction to test for uric acid composition. I no longer have fresh samples
22 February 2021 1,328 1 View
I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...
22 February 2021 5,324 3 View