Which is easier to electrospin? Conductive polyaniline or polypyrrole?

Which is easier to electrospin? Conductive polyaniline or polypyrrole?

09 October 2015 4,352 3 View

How do I aminate GO (graphene oxide)?

09 October 2015 517 2 View

Any update about closing the intrinsic defects within graphene?

Any update about closing the intrinsic defects within graphene?

09 October 2015 8,413 0 View

Which of Cu etchants are better in graphene transfer? Ferric nitrate, ferric chloride or ammonium persulfuate? and why?

Which of Cu etchants are better in graphene transfer? Ferric nitrate, ferric chloride or ammonium persulfuate? and why?

09 October 2015 6,928 1 View

What are the factors that control the absorption capacity of water super-absorption polymer salts? like Sodium polyacrylate?

What are the factors that controlling the absorption capacity of water super-absorption polymer salts? like Sodium polyacrylate?

09 October 2015 1,842 2 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

What are the most relevant MSc proposal topics for Petroleum Production Engineering at the moment?

I am a Petroleum Production Engg MSc student at Robert Gordon University in Aberdeen and I am in the process of selecting a topic for my MSc Engineering Investigation proposal. I would very much...

01 March 2021 7,396 4 View

How to model Supercritical water gasification (SCWG) process in Homer software?

Hi everyone How to model Supercritical water gasification (SCWG) process in Homer software?

25 February 2021 4,075 1 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

How we can measure Kemp % in wool without using of benzene?

Would you please let me to know about the methods for measurement of medullation and Kemp % on animal? My problem is that the wool sampling and sending to laboratory is not possible. So I would...

21 February 2021 7,260 4 View

What cause the beating of this signal?

I am trying to simulate the impact of a sinusoidal force on a Beam, yet I registred this beating signal (Displacement by time). The freaquency of excitation was the same as the first natural...

19 February 2021 5,872 3 View

What is the best substrate for exfoliating few layers of hexagonal boron nitride (hBN) using traditional scotch tape method?

Unlike graphene, it is usually very difficult to exfoliate few layers (~10 nm thick) of hBN on SiO2 substrate due to lip-lip interaction at the edges. Au substrates have been proven very useful...

16 February 2021 2,635 2 View

Is secondary metabolite production more at vegetative growth stage or during reproductive stage?

Hi, I am working on the effect of heavy metals on a medicinal plant by pot experimentation. Analyzing the effect of heavy metals on secondary metabolites is one of the parameters. I will be...

11 February 2021 6,683 6 View

How can I calculate teh crystallinity degree of graphene oxide?

I had treat my XRD diffraction pattern by Highscore to calculate the crystallinity degree Xc and I have the formula but I dont no the 2Theta of Ac and Aa to calculate Xc. Is it like polymers...

10 February 2021 6,305 5 View