Hi I'm searching good electrically conductive polymer. Do you know any such polymer available in the market?
https://www.heraeus.com/en/group/products_and_solutions_group/conductive_polymers/conductive-polymers-home.aspx
http://www.masterbond.com/properties/electrically-conductive-adhesive-systems?gclid=COfYyKDGtNECFWsq0wodD9UD5A
Do you want electrically conductive polymer composites? or inherent conductive polymer?
Santhosh
https://www.heraeus.com/en/group/products_and_solutions_group/conductive_polymers/cpolymers/conductive-polymers.aspx
What is the reason for changing color of the paraffin based PCM upon prolonged heating at around 142 Deg C.
09 October 2019 8,756 5 View
We have prepared silicon powder, which contains 30 nano to 9 micron range. We checked around 35% of particles are less than 1 micron. We want to separate these 35% particles from the rest. Any of...
08 September 2018 7,653 4 View
I like to know, how can we give super-hydrophobic finishing during HTHP dyeing of polyester fabric. I've heard that such finish give a permanent super-hydrophobic finish on polyester fabric. If...
07 August 2018 4,007 1 View
I want to make dehydrated PU solution for coating nano-silicon, which reacted with water. Is it possible to get alcohol based PU solution? Any paper or suggestion will be appreciated....
10 November 2016 1,538 2 View
Hi I like to know, is it possible to deposit silicon on cotton fabrics using vapor deposition method? I shall be glad, if you kindly share any related paper.
06 July 2016 8,701 3 View
I'm interested to know, whether there is any formula to determine the maximum strength of a yarn for different counts, different materials and staple length...
10 November 2015 985 7 View
Is it possible to develop copper-silver alloy? Is there any work on this? I want to know alloy only for copper and silver, no other metals..If any of you has done research on this, pl. let me know...
03 April 2015 7,361 3 View
We are searching for some fire-retardant chemicals, which gives permanent fire retardant property, but will NOT affect the natural hydrophilic property and permeability of cotton fabric. Could...
31 December 2014 8,762 4 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...
08 August 2024 4,842 0 View
I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...
07 August 2024 5,177 3 View
is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it
06 August 2024 947 1 View
Are there any fluorescently labeled anti-Alpaca secondary antibodies raised in Donkey? So far I have only been able to find anti-Alpaca secondaries raised in Goat. Or is this not possible due to...
04 August 2024 4,255 1 View
What is the method for analytically calculating the wear and service life of polymer-polymer sliding pairs?
04 August 2024 1,078 1 View
Why is the molecule's orientation with an electric field affect polarizability? Electrons are diffuse enough to be independent with respect to orientation and effect of electric field on...
03 August 2024 7,843 1 View
Hi, I'm curious to know if data on chemical compounds from PubChem, such as water solubility properties, can be used to train a machine learning model for commercial purposes. Will this infringe...
30 July 2024 8,707 1 View
Hello, I'm trying to measure the conductivity of semiconductor films but since I don't have a commercial four point probe set up I would like to build one on my own in my lab. I have generators,...
30 July 2024 906 2 View
Hello everyone, I am new to this characterization but watching videos on youtube I have already plotted a Nyquist plot (Z' and -Z'') and already fitted models on my material using Zsim. But now I...
29 July 2024 1,376 0 View