Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

What is the difference between PBE and PBEsol functional?

Hello, I am a 3rd year chemistry student and I'm writing my project report on computational chemistry. does anyone know how PBEsol improves upon the PBE functional? Thanks in advance

19 February 2021 7,068 4 View

Can someone help me with this error that I am getting while estimating a VAR model in R?

I am using annual time series data to estimate a VAR model in R. However, when I run the command to find the optimal lag length, I get the following error: Fehler in VARselect(data, lag.max = 10,...

18 February 2021 9,647 3 View

In your experience what is the difference between G.652D and G.655D optical fiber. In field and in lab?

In our current era there is a big confusion about the usage of G.652 and G.655 optical fiber cable. Theoretically G.655 is much better than G.652 but the operator feel that G.652 is giving almost...

11 February 2021 4,006 8 View

How many dilutions are good enough for TCOD50 of SARS-CoV-2?

I started with 10e-1 till 10e-10. But when I searched for online calculator they mostly consider 5 dilutions. Is there a reason behind it or I should make less dilutions?

11 February 2021 5,839 3 View

Protocol for bacterial samples preparation for Scanning Electron Microscopy ?

I want to prepare bacterial samples to observe the bacterial cell lysis by bacteriophage protein (endolysin) through scanning electron microscopy. Please, anyone can share the protocol of...

01 February 2021 1,173 3 View

Experimental Design: How deal with pseudreplicates with immunological and clinical-chemical paramaeters?

Hello everybody, I am investigating the influence of a toxinon various clinical-chemical and haematological parameters in fish. I have three treatments (control, low dose, high dose) in my...

24 February 2021 1,243 1 View

I have a problem with kanamycin - why the kanamycin doesn't affect?

Hi everyone, I need to expression of GFP with pET28 plasmid in E. coli BL21(DE3) plysE. Transformed cells have kanamycin and chloramphenicol resistance. Normally, only transformed cells should...

22 February 2021 4,032 4 View

Which way will be better to give OGT inhibitors doses through intravenous or orally for pregnant female rats and concentration suggestion?

I'm planning to use ST078925 OGT inhibitor from TimTec (OGT-O-linked N-acetylglucosamine (GlcNAc) transferase) for female rats.

16 February 2021 7,850 2 View

Can 5-FOA Diffuse Through Agar?

I am preparing to do a gene knockout in the filamentous fungi Coccidioides posadasii targeting pyrG/URA3 so that 5-FOA can be used for selection pressure instead of traditional antibiotic...

16 February 2021 169 4 View

How to calculate the sample size required to detect the difference in pharmacokinetics of methotrexate?

I came across with this study here, https://www.clinexprheumatol.org/abstract.asp?a=5066 And this study says: "The sample size calculation was done to compare two different MTX starting dose...

14 February 2021 3,017 3 View

How to calculate ultraviolet dose in Gy or J/kg?

Currently I'm doing a literature review regarding the comparisons of different types of radiation such as uv, electron beam and gamma radiation. But I'm having a difficult time converting uv unit...

11 February 2021 7,642 3 View

Why do high doses of humic substances inhibit the growth of corn roots? Is there a toxicity effect?

Length, volume, surface area and dry mass of corn roots treated with humic substances increased up to 13 liters per hectare and decreased with higher doses.

02 February 2021 2,190 4 View

What are the naitve functions of bacterial NRP?

The bacterial NRPs (nonribosomal polypeptides) are famous as clinical drugs such as antibiotics, but is there other native function of these NRPs of bacteria except antimicrobial, because their...

01 February 2021 4,280 1 View

How to improve my BrdU immunostaining?

24 January 2021 414 3 View

Is there a study on the maximum thumb extension that can be possible in a range of population while using injectors?

In Most pen injectors while dialing the dose, the dose dialer comes our or extends outside the pen as dialing happens. How much maximum extension of dialer is acceptable for performing...

17 January 2021 9,770 1 View