Dear All, How to convert a potential Vs Standard Hydrogen Electrode to a potential Vs Na/Na+ (used in sodium ion batteries) ?

Dumindu Pasan Siriwardena Thanaweera Achchige @Dumindu_Thanaweera_Achchige

10 October 2018 0 8K Report

Dear all, can someone please describe how to convert potential values Vs SHE into potential values vs Na/Na+ electrode and vise versa.

Badges
Science topic

More Dumindu Pasan Siriwardena Thanaweera Achchige's questions See All

Hi, Is a capacity protection needed while testing cathode materials (CM) for rechargeable batteries and do we need to charge or discharge CM first ?

Hello every one. I have a question on electrode materials for rechargeable batteries. When testing new materials (as cathode and/or anode) do we need to set up a protection for capacity using the...

06 July 2018 3,266 0 View

What happen (A)Ball milling sodium carbonate (sodium source) and transition metal oxide precursor. (B) Heating this mixture at high temperatures ?

Ball milling sodium source and transition metal oxide, followed by high temperature heating for a certain time period is a successful method in synthesising sodium interchalated transition metal...

05 June 2018 2,711 0 View

Hello, Could some one please explain the methods of determining the capacity of unknown electrode materials?

Determination of the capacity of electrode materials is an essential step in evaluating it's performance.

04 May 2018 8,625 6 View

What is the best way to prepare pure Sodium metal foils for sodium-ion coin cells and how to use Sodium metal as a counter electrode ?

In many research Sodium metal have been used as counter and reference electrodes. How to use Sodium metal in a three or two electrode setup ? Should we prepare the setup in an inert environment...

02 March 2018 8,482 4 View

Hey there. Is Carbon Super P and Carbon Black the same material? Or are they different? Could I substitute Super P with conventional Carbon Black ?

Super P and Carbon Black have the same CAS number. So could some one explain the difference of the above two. I would really appreciate an answer.

02 March 2018 734 8 View

What is the best way to keep an anaerobic chamber anoxic in the absence of hydrogen?

I'm a graduate student who works with an anaerobe, so I often work in an anaerobic chamber. I've been working on an assay that involves the steady-state of the quinone/ quinol pool. Anoxic...

03 March 2021 2,971 1 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Precipitate after adding laemmli buffer to protein solution containing Potassium Acetate?

Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...

01 March 2021 2,622 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How to model Supercritical water gasification (SCWG) process in Homer software?

Hi everyone How to model Supercritical water gasification (SCWG) process in Homer software?

25 February 2021 4,075 1 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

Is it possible to define biogas as a fuel in the reformer process(scwg) in Homer software?

Hi every one Is it possible to define biogas as a fuel in the reformer process(scwg) in Homer software? Biogas fuel is not available in the options thanks

23 February 2021 6,518 3 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View