Data of monocrystalline SM55 PV or KC200GT module ?

18 March 2024 0 3K Report

I'm looking for the experimental data - of different irradiance at constant temperature and experimental data - different temperature at constant irradiance to the SM55 PV module or KC200GT

Badges
Science topic

How is monosilicon grown on top of SiO2 in SOI process?

Hello. I wonder how can the monocrystalline silicon be grown on a SiO2 substrate? Normally, polysilicon is supposed to grow on SiO2 substrates due to crystal lattice mismatch but apparently the...

15 August 2022 8,519 2 View

How do I determine the d spacing and ultimately the hkl values of monocrystalline materials from the SAED pattern?

Below I've attached the image I got from SAED of my material and I'm trying to determine the d spacing and ultimately its hkl values. I used Fiji image J TEM suite for my other samples which were...

25 November 2020 6,605 3 View

What is the built-in energy and carbon footprint for PV panels based on perovskite photovoltaic cells?

Dear colleagues, does any of you have access to information - what kind of carbon footprint have panels based on perovskite photovoltaic cells? Is it the same as with "ordinary" monocrystalline or...

01 February 2019 9,177 4 View

How to set different orientations for orthotropic materials (for single crystal turbine blade) in ANSYS APDL in modal analysis?

In orthotropic materials, materials properties are different in different directions. Therefore, we need to analyse the model for different orientations differently in ANSYS Mechanical APDL.

05 June 2016 4,523 3 View

Are the elastic constants used in the modified Williamson-Hall method obtained by a monocrystalline or a polycrystalline sample?

I am determining microstructural properties of aluminum. I need to know the elastic constants of aluminum in order to obtain the contrast factor of dislocations from the Ungár method, and then...

16 December 2014 8,172 4 View

Are the elastic constants used in the modified Williamson-Hall method obtained by a monocrystalline or a polycrystalline sample?

I am determining microstructural properties of aluminum. I need to know the elastic constants of aluminum in order to obtain the contrast factor of dislocations from the Ungár method, and then...

11 December 2014 3,891 5 View

What are the effects of temperature and high illumination level on the monocrystalline silicon diode ideality factor (i.e. n)?

For silicon based PV module

23 September 2014 6,503 1 View

Is there a reliable and fast way for measuring the thickness of a monocrystal when this is in the order of 1-2 mm?

I am dealing with K alum monocrystals ((111) surface area in the order of 15-50 mm2) with a mass of around 10-100 mg.

08 September 2014 7,682 15 View

Which type of solar panel (monocrystalline or polycrystalline) is suitable for pv power generation for home energy applications?

07 August 2013 7,835 1 View

Regarding to polycrystalline nanoparticle, does grain boundary present active surface?

During nanoparticle synthesis, polycrystalline NPs instead of monocrystalline NPs tend to dominate as particle size grows larger. How to determine the active surface area of polycrystalline NPs?...

01 January 1970 5,267 4 View