Cr (VI) reduction and EC process

More Milad Mousazadeh's questions See All

Can anyone recommend software for creating scientific illustrations (or charts, graphs, etc.)?

I'm looking for something user-friendly with good data visualization tools. already tried OriginLab and GIMP.

04 June 2024 945 3 View

Which ubuntu version is fully compatible with ASUS Prime Z790M-Plus motherboard?

Dear Expert I have a PC containing ASUS Prime Z790M-Plus motherboard and Intel 13th gen CPU and need to install ubuntu on it. I have searched this list...

19 March 2024 5,160 2 View

High Power Inductor and reactor design?

hi, I need a practical calculation and design for designing passive harmonic filter inductors. and the information about core sizing and considerations for 3-phase system.

09 February 2024 1,913 1 View

Is there any protocol for the histological evaluation of colon biopsies after ex-vivo culture?

I want to evaluate and compare human colon biopsies after 24h ex-vivo treatment with inflammatory and non-inflammatory cytokines. Apart from the H&E assessment, is there any protocol for the...

08 February 2024 5,357 3 View

Is synergetic control a model-free or model-based approach?

Is synergetic control a model-free or model-based approach? Please tell me the reasons. How about PID control?

07 February 2024 6,823 2 View

What are the origin of crystals that form upon heating castor oil?

In the process of maleinizing castor oil with maleic anhydride I am observing formation of crystal-like structures upon heating the solution above 100 degrees Celsius. The solution is just castor...

02 February 2024 5,095 1 View

Hello, I need heat loss and heat combustion formulas and equations for two-stroke diesel engine?

In the case of two-stroke diesel engine high pressure and temperature happen in combustion stage which releases Q_combustion and Q_loss. So I look for these two parameters formuals and equations...

11 January 2024 5,206 0 View

Difference between output power variations of (Pd - coated) and (Pd-Cu -coated) tapered optical fiber?

Output power changes on the optical fiber sensor for hydrogen gas have been illustrated. Why does the Pd-Cu sensor show no sensitivity at low hydrogen percentages while the Pd sensor does? Why...

01 January 2024 2,200 2 View

Change in multiple band gap of CuSe after Ni-doping?

The band gap results for CuSe and Ni-doped CuSe, according to the Tauc plot and the mathematical DITM (Derivation Ineffective Thickness Method) model, in which thickness and type of transition...

29 December 2023 614 2 View

"Optimizing Electrochemical Sensors: Molecular Imprinting Polymer Technique and AutoDock Vina Analysis of Functional Monomers"?

In the development of electrochemical sensors utilizing the Molecular Imprinting Polymer (MIP) technique, I retrieved functional monomers from existing literature. Can AutoDock Vina be utilized to...

22 December 2023 3,955 1 View

Why Do TDS and EC Increase with Larger Wastewater Volumes, While BOD and COD Decrease?

I have carried out MFC experiments on three different volumes, 50, 500 and 1000 mL of wastewater. Results after MFC treatment shows that TDS and EC are more in larger volumes of water i.e. TDS and...

09 August 2024 9,621 0 View

Why do these abnormal charge/discharge curves of coin cell batteries appear?

As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...

24 July 2024 6,930 1 View

How to measure electric conductivity (EC) in agricultural soil?

For Electric conductivity (EC), I have taken 10 g of soil in 25 ml of water and directly measured it without filtering the suspension. Is this correct ?

22 March 2024 2,351 3 View

Is there any paper claiming that the creation of holes in electrodes has either no effect or a very negligible effect on the removal efficiency?

I am looking for papers that have investigated this topic and have claimed that the creation of holes in electrodes have almost no effect on the efficiency of contaminant removal in the...

15 March 2024 1,404 0 View

Why we are using copper electrode in electrocoagulation?

Recently I'm working in electrocoagulation of dye effluent with titanium electrode, what are the other electrode can be used instead of titanium ? Why?

12 February 2024 7,570 0 View

Introducing buffers with low EC for purification?

I need a buffer with an EC less than 0.2. Can someone introduce me to such buffer for purification by HIC method.?? Thanks

17 January 2024 1,369 0 View

Buffer preparation for hic chromatography method?

I'm purifying a recombinant protein. Currently, I use HIC to purify it. The specification of my Bind and Elution buffer is according to the following concentration, EC and pH... Bind, Sodium...

15 January 2024 8,168 2 View

Does KEGG or MetaCyc provide a batch search or bulk search feature?

Hi! Now I have 500 enzyme ECs and I want to figure out which pathway each EC belongs to. One option is that I can click the search button 500 times, but I'm wondering if there's any batch query...

26 December 2023 3,722 0 View

What is the best type of Al for electrocoagulant anode in waste water treatment?

I wanted to know the best type for aluminum anode for electrocoagulant in waste water tretament for beverage dairy industry

30 October 2023 667 0 View

Can i open my own data (csv file) using openair in R?

Hi everyone, I would like to know if I can plot conditional probability function (CPF) for my own data. I have my own data of wind speed and wind direction in csv along with the data I have...

27 October 2023 8,097 0 View

Rameshwar Ameta

We can reduce it photocatalyticaly using TiO2 as photocatalyst and sunlight as light source.Although the efficacy of the process is low but you can observe the changes in ox.states of chromium by open eyes in solution phase.

T. H. Al-Noor

Article Removal of chromium (VI) and lead from electroplating efflue...