Why does the CFD results change with different initialization techniques ?

I have recently observed that the CFD results shows significant variations with different initialization techniques (mainly standard, fmg and hybrid). What could be the technical reason for this...

07 August 2016 9,605 15 View

Does 'symmetry'and periodic'boundary conditions in CFD (Fluent solver) behaves the same?

Even though theoretically 'symmetry' and 'periodic' boundary conditions are totally different, i found that the CFD results with either of them are very similar. Why it is so ?

05 June 2016 8,685 13 View

How to find whether there is flow separation or not using ANSYS Fluent ?

05 June 2016 2,982 4 View

For numerical simulations, which type of mesh (hexahedral or polyhedral) yields better results ?

Recently i read couple of articles on the mesh in case of numerical simulation. One claimed, hex meshes yields better results and the other claims it is poly mesh that yields better results. Which...

02 March 2016 5,046 6 View

Is it difficult to converge a CFD problem with pressure inlet and pressure outlet boundary conditions ?

Is it difficult to converge a CFD problem with pressure inlet and pressure outlet boundary conditions ? I am looking for the reason today's this. thanks in advance. thanks & Regards, Rajesh.

02 March 2016 9,311 6 View

Anyone working on CFD analysis of micro-channel heat exchangers ?

I am looking for works or documents regarding CFD analysis of micro-channel heat exchangers. Any documents would be helpful. Thanks in advance. Regards, Rajesh.

31 December 2015 8,270 0 View

How does a coil perform when operating as an evaporator and when operating as a condenser ?

Does a same coil (heat exchanger) show different performance when used as evaporator and when used as condenser ? I would like to know this in both theoretical and practical case ? I expect the...

11 December 2015 956 11 View

How beneficial is it to initialize a genetic algorithm problem with a know best ?

01 February 2015 7,941 14 View

How can I do parallel computing in python 2.7 using MPI?

I have written a python code to carry out genetic algorithm optimization, but it is too slow. I would like to know how to run the same in parallel ? For more clarity, another python code will be...

31 December 2014 5,998 14 View

Are static pressure and absolute pressure the same in magnitude?

10 November 2014 2,775 30 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

How climate change will influences human and animal behavioral change?

The role of climate change influencing the human behavior as well as economics interest

01 June 2021 0 0 View