How to find load / force acting on the top face in ansys workbench?

The image attached is the representation of my application. This is an assembly of three items (top plate, bottom plate and the 5 load cells). The bottom plate is fixed and a load of 40 Kg is...

15 December 2020 1,145 6 View

Flow separation : Turbulence or Laminar?

Hi researchers, I am performing CFD analysis inside an electronics enclosure. The Reynolds number is below 1000 but I have some blocks and heat sinks inside that creates flow separation and wake...

20 May 2019 1,357 19 View

Has anyone experienced varied behaviour of ICP-OES instrument each time it is operated?

We face the following problem: 1) It's a general problem faced. During the standard calibration (irrespective of metal), the std. calibration was successful the previous time, but the next time...

24 January 2018 2,469 3 View

What is the flaky material present on the surface of the biomass (Untreated) as seen in the Scanning Electron Micrograph?

23 June 2017 3,864 1 View

Is it advisable to determine the Cr(VI) concentration present in NaOH (Desorbing agent) using 1,5 Diphenyl carbazide method?

06 February 2017 8,277 3 View

I would like to know if anyone has experienced infecting T47D (Breast Cancer) cells lines using Lentivirus?

Lentivirus; T47D cells

10 May 2016 1,308 3 View

What is the best method to screen an efficient part- root, shoot and leaves (separately)of a plant biomass in metal uptake?

With the optimal pH found, can I screen the part (root, shoot or leaf) by just subjecting it to the metal solution (fixed conc.) at optimum pH for a particular time period? Or is time studies...

12 March 2016 9,696 3 View

Can anyone suggest a data base to identify the protein of the MDA-MB 231 cell line (breast cancer)?

Name of protein to be chosen for MDA_MB231 cell lines and its structure will be useful.

16 February 2016 7,370 1 View

What would be a suitable composite material for drive shaft?

Hi all, I am searching for a composite material which will be effective as like existing material used in Automobile drive shafts. I have to do FEA analysis using ANSYS 14.5 and submit a...

01 November 2015 4,769 6 View

In continuum solids, what causes the material to amplify acceleration at resonance?

30 September 2015 9,138 3 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

Why Trivalent chromium start precipitating above PH 5 ? Moreover discuss difference between adsorption of chromium and precipitation of chromium ?

I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...

01 March 2021 5,475 2 View

How can I assign a velocity along one direction to CO2 molecules in a molecular dynamics simulation using GROMACS?

Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...

26 February 2021 10,014 3 View

CGA 300 Regulator for CO2 cylinder?

Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...

25 February 2021 3,292 3 View

What are the methods used for CNT..?

Respected Professor's i hope you are doing well and happy. i need some information about carbon Nanotubes. before blending the CNT with the matrix the CNT has been introducing in some treatments....

24 February 2021 5,383 5 View

Is it efficient to do liquid biopsy to investigate the gene expressions of the tumor?

To do liquid biopsy and look for specific gene expressions there are so many published papers. Thera are different protocols and procedures used to isolate circulating cell free RNA or mRNA from...

23 February 2021 7,326 5 View

How to clean up TEM grid with plasma cleaner?

I need to clean the hydrocarbon contamination on the carbon substrate of TEM grid. However, I heard that substrate could be broken by the powerful plasma. My substrate is pure carbon, with ~3nm,...

23 February 2021 3,262 5 View

What are some underexplored theories and concepts in Activated Carbon as A Water Filter?

Hi, me and my team mates are currently planning to pursue the topic of Activated Carbon from Coconut as a Water Filter. And we would like to ask for your suggestions and knowledge on what specific...

22 February 2021 6,569 3 View

What are some underexplored theories and concepts in Activated Carbon as A Water Filter?

Hi, me and my team mates are currently planning to pursue the topic of Activated Carbon from Coconut as a Water Filter. And we would like to ask for your suggestions and knowledge on what specific...

21 February 2021 7,561 4 View