I want to discern a correlation between corrosion rates and other properties of the fuel (besides its composition such as total acid number (TAN), kinematic viscosity (KV). In addition, I desire to present the rates of corrosion in a way that will facilitate extrapolation to relevant conditions. Can somebody suggest laboratory experiments to extract an apparent activation barrier for the corrosion rates of light alloys such as brass and aluminum which can . constitutive relation (say a power law) that can be used to connect the rate of corrosion to the composition of the fuel possible total acid number, specific gravity and kinematic viscosity, etc?, Please, share with me articles or thesis related to the aforementioned research.
A paper related to a published research & Thesis outline , "Efficacy of prediction of corrosion rates of metals (brass , copper and Al) in blend biodiesel and diesel with fuel deterioration properties(TAN, KV and specific gravity)", will be of interest to me. Please, urgently share
Can somebody share with me an article, entitled, "Wu ZhenFen; et al., Corrosion characteristics and kinetics of copper in biodiesel.China Oils and Fats 2014 Vol.39 No.2 pp.67-70 ref.6
Please let me know if these reference/sites are helpful to you:
1. [PDF]Investigation Of Corrosion-Influencing Factors In Underground ...
www.trucking.org/ATA%20Docs/What%20We%20Do/.../diesel-corrosion-report.pdfCached
allowed us access to their underground storage tanks and related documents. ..... UST System With Fiberglass Tank With Severe Metal Corrosion ............................ 28 ..... disproven by the results of our research, validation would be speculative. .... gasoline, and biodiesel is now regularly blended into diesel fuel, partly ...
2. [PDF]Biodiesel: Production, Characterization, Metallic Corrosion and ...
cdn.intechopen.com/.../InTech-Biodiesel_production_characterization_metallic_corro...Cached
by RAA Munoz - 2013 - Cited by 3 - Related articles
Jan 13, 2005 - and their regulated methods by European, American and Brazilian norms. A special topic is ... for monitoring contami‐ nants (glycerol and trace metal) in biodiesel is presented. .... 4% to 5% the mandatory blend percentage of biodiesel to diesel oil. ...... Development and validation of a fast method for de‐.
3. Storage stability and corrosive character of stabilised biodiesel ...
www.sciencedirect.com/science/article/pii/S0016236112008861Similar
by DM Fernandes - 2013 - Cited by 38 - Related articles
The use of B10 (diesel containing 10% v/v biodiesel) blend would allow the total .... This method was validated and demonstrates similar performance to atomic ... and galvanised steel coupons were selected due to their resistance to corrosion ...
Dennis
Dennis Mazur
Prof. Dennis Mazur,
I appreciate your attached bu I regret to inform you that t my requests are not meet.
I need English version of articles such as :Wu ZhenFen; Su YouYong; Wang Hua; Chen Fei Corrosion characteristics and kinetics of copper in biodiesel. China Oils and Fats 2014 Vol.39 No.2 pp.67-70 ref.6.
Articles which can educate to develop correlation between corrosiion rates and other properties of the fuel (besides its composition).
Articles which can assist me in rates of corrosion in a way that will facilitate extrapolation to relevant conditions.
experiments that can enables me to extract an apparent activation barrier for the process. Is there a consititutive relation (say a power law) that can be used to connect the rate of corrosion to the composition of the fuel.
I am still awaiting researchers' responses
- Badges
- Science topic
- Similar topics
- Engineering
- Materials Engineering