Can Moringa oleifera husk prepared carbon particle be used in casting of aluminium composites?

Dhanashekar Manickam @Dhanashekar_Manickam3

03 March 2014 1 8K Report

Moringa oleifera is a natural plant which has many medical benefits and used in food purpose.

Moringa Oleifera Husk is a natural plant and contains fiber. Burning process will turn this celluose and fiber in Carbon (C 4). All carbon whether organic or inorganic carbon as certain affinity to composites. Even though inorganic carbon are be used widely. Theoretically even plant carbon may also serve the similar purpose. Only on thing need to make sure the quality of plant fiber produce from burning. If the burning is not complete and free- OH or bonded OH still exist in large number (FTIR Peak 3600-3300), the the Polar state of the carbon might inhibit the adhesion between composite and carbon. Please contact me if further additional reference required Sir.

Badges
Science topic

More Dhanashekar Manickam's questions See All

What is the relation between hardness and compression strength of Aluminium material?

Whether there is any valid relation between hardness and compression strength of a material. Please share your supporting article.

06 July 2017 9,360 3 View

What is the difference between these two alloys AlMgSi and AlSiMg ?

Whether these alloys are same or different. Please share relevant document.

04 May 2017 2,191 1 View

Where can i purchase LM25 alloy in rod shape ?

Am in need of LM25 alloy in as cast condition in the form of ROD shaped of diameter between 10 mm to 15 mm and a length of 500 cm. Any information you can provide me would be greatly appreciated.

11 December 2016 1,490 2 View

Classification of sliding speed/ velocity in tribotesting?

How to fix a range in setting the sliding speed/ velocity while performing a tribotest on aluminum composites. In specific what is considered as slow speed and high speed, how is it justified.

10 November 2016 8,733 3 View

Best heat treatment method for Aluminium metal matrix composites ?

As we know there are various heat treatment methods (T4, T6, T7, T3 and T8) for modifying the properties of the aluminium alloys (grain modifier, varying solutionizing temperature, artificial...

09 October 2016 7,540 8 View

What is the effect of Graphite addition in Aluminium composites with respect to density ?

05 June 2015 9,856 11 View

Can anyone share ASTM E9-09 standard?

Standard test methods of compression testing of metallic materials at room temperature

04 May 2015 3,654 6 View

What are the phases of alloying elements present in A356 alloy?

04 May 2015 1,505 6 View

How to calculate Volume fraction of matrix in a hybrid composites?

as there is formula to calculate the Volume fraction of the reinforcement as given in the attached journal page no:3. Now how to calculate Volume fraction of matrix when the composite have...

02 March 2015 7,081 8 View

What is the minimum diameter of the disk (Aluminium composites) used for Pin on Disk test?

I have fabricated the composites for an diameter of 50mm. I s possible to use this as a disk in wear test against the steel pin.

02 March 2015 5,451 5 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View