Why do my MCFs not form monolayer?

Hello, I am looking for some expertise on culturing MCF7s. I purchased them from ATCC and I have been following all media and culture conditions. Media is EMEM with 10% FBS and 10ug/mL of...

27 February 2021 3,904 2 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

Can we measure porosity of a composite by DSC (heat flow measurements)?

In the DSC conducted for A and B (image provided). B is a derivative of A. Can I conclude that the porosity of composite B is more than A, Since the heat flow is decreasing with increase in...

26 December 2020 9,104 3 View

Can I carry out LC-MS for AuNPs?

Will it be helpful to know the nature of stabilizers used in synthesis of curcumin (if it has polymerized or not). Any specific measures to be followed to carry out these kind of experiments?

15 December 2020 2,283 4 View

What could be the possible reason for lack of Mtb protein expression cloned in pET28a even after induction ?

12 December 2020 2,584 8 View

Why the IT services companies (based in India) are mainly patenting only at the USPTO?

Please suggest some papers/reports on the changes in the policy with respect to patenting of computer software in India. Does it have any implications as to why the IT services companies (mostly...

12 November 2020 8,351 1 View

Can I combine data from two separate fluorometeic experiments?

I performed a fluorometric experiment with two different cell lines. I had four conditions per experiment, and four "sub-conditions" per condition, wherein I add three different chemicals (the...

08 November 2020 5,113 3 View

Why I am not getting UV absorbance peak of AuNPs?

I synthesized Au deposited on graphite electrochemically by using chronopotentiometry. How much ever I tried I couldn't get UV absorbance peak of AuNPs in any number of solutions I tried? But when...

20 October 2020 2,040 5 View

Please suggest some good quality and free journal with very short response time for MEMS, piezoelectric energy harvester research?

Please suggest some good quality and free journal with very short response time for MEMS, piezoelectric energy harvester research?

27 August 2020 994 4 View

What is the critical chloride concentration for concrete made of GGBS and for concrete made with Silica fume ? Is it 0.5% ?

Ccrit or Cth values for concrete made with different mineral admixtures

21 July 2020 7,301 2 View

Looking for Materials with high thermal expansion coefficient and high temperature resistance?

03 March 2021 8,272 1 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

How to increase a model accuracy ?

dear community, my model is based feature extraction from non stationary signals using discrete Wavelet Transform and then using statistical features then machine learning classifiers in order to...

03 March 2021 6,994 5 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

How optimize the Size Exclusion Chromatography?

Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...

01 March 2021 2,215 2 View

How can we obtain a modification factor for creep parameters?

I want to obtain standard creep parameters of salt rock by creep parameters of rectangular samples. Is there a modification factor to convert creep parameters of rectangular (prismatic) rock salt...

01 March 2021 7,131 1 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Anyone found any research papers on solar furnace design calculations (for solar concentration)?

I am thinking about working on solar furnace with heliostats that concentrate sunlight and heat molten salt, but currently no luck with research. Not a lot of papers based on the subject. (check...

01 March 2021 5,023 5 View