What is the most reliable source to get Impact factor of journals?

Source to get Impact factor of journals

01 March 2021 6,654 2 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

Stress/strain tensors decomposition ???

25 February 2021 6,760 1 View

Best FE Program for Concrete Strengthened with FRP Sheets?

Colleagues, I have been using ANSYS to model concrete strengthened FRP sheets, but less than happy with it. Any has recommendation for efficient, easy to use FE program for modelling concrete...

22 February 2021 7,528 3 View

Any information about dinitrosalisylic acid reagent end point color stability ?

I work on estimation of alpha amylase activity using dinitrosalisylic acid reagent If i put the reagent to stope the enzymatic reaction and allow the reagent to react with the produced reducing...

17 February 2021 7,402 4 View

Using liquids as superstrate in Fabry-Perot Cavity Antenna?

Hi, A Fabry Perot Cavity allows to increase the directivity of a low gain antenna by putting in the top of cavity a superstrate with high permittivity such as a ceramic (er=10.2). However,...

09 February 2021 6,799 8 View

Experiment statistical analysis?

07 February 2021 3,635 3 View

Distribution of modes fields ?

Hi, We find a specific distribution of electric fields in structure for different frequencies which can be seen using em solvers and known as modes. I would like to know how we can choose the...

04 February 2021 10,043 3 View

Greetings Doctors, If i did a same experiment for a 2 populations and i need to publish this work in a 2 different papers?

If i did a same experiment for a 2 populations and i need to publish this work in a 2 different papers can i use the same word in the writing of these 2 papers or this would considered as...

04 February 2021 4,648 4 View

Hello every body, I am looking for a solvent for produced sulfure in a desulfurization systems?

Carbon sulfur is not practical solvent for the the celaning.

06 July 2019 3,246 1 View

How can we introduce deep eutectic solvents into Aspen Plus and perform vapor-liquid equilibrium simulations?

Desulfurization process

07 August 2018 3,471 1 View

I am running extractive desulfurization of fuel oil using ionic liquid, but why the sulfur content increased after GC-SCD analysis?

I am using choline chloride: ethylene glycol (molar ratio 1:2) as extractor to desulfurize dibenzothiophene (DBT) in n-dodecane. The initial concentration of DBT is 100 ppm. Condition of...

06 July 2018 2,096 8 View

What is the best method for desulphurization of heavy fuels?

among the different techniques for oil desulphurization (such as HDS, BDS, ODS, ...) which is more appropriate for heavy oil?

06 July 2018 4,242 3 View

What could be the reason for the adsorbent with higher surface area adsorbed less than the adsorbent with the lower surface area?

I am presently working on the two different material for adsorption purpose.But some how i am finding that the material with higher surface area,pore volume and pore size is adsorbing less as...

01 February 2018 6,110 0 View

Why is the lambda max of dibenzothiophene chosen as 275-284nm and not 230-240nm?

In most research papers the wavelength chosen for DBT detection is 284nm, but according to the NIST data the maximum absorbance occurs around 230-240nm. Can anyone explain why it is...

07 August 2017 3,923 4 View

Which of the available techniques for desulphurization of the oil is more effective?

which of the available techniques for desulphurization of the oil is more effective?

05 June 2017 2,949 10 View

Which company provide the equipment about combustion tube ?

Hi I want to measure the temperature change during a flooding process ? The combustion tube equipment is used for this property, but I do not find any company provide this equipment. Can anyone...

04 May 2017 9,633 3 View

Could anyone tell or suggest me the possible routes for bitumen production after adsorptive desulfurization of diesel Oil?

After having ULSD by adsorptive desulfurization, now thinking how could I link up residue to bitumen production? I want ideas.Please come up with ideas ....

07 August 2016 5,184 6 View

Does anyone have any tips on desulfurization of diesel industrial modeling ?

Does anyone have any tips on desulfurization of diesel industrial modeling ? I am looking for a simple but exact model to design an adsorption column

09 October 2015 9,912 1 View