Can graphitic carbon nitride or simply g-C3N4 be synthesized from graphen and/or graphite precursors?

More Amir Irandoust's questions See All

Would it be possible to provide a single equation or rule to calculate both the fugacity coefficient and the activity coefficient in a mixture?

Based on the best of my knowledge, fugacity coefficient for a component in a mixture is generally obtained from EOS, whereas the activity coefficient of a component in a solution is calculated...

04 May 2017 419 0 View

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

Why Trivalent chromium start precipitating above PH 5 ? Moreover discuss difference between adsorption of chromium and precipitation of chromium ?

I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...

01 March 2021 5,475 2 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

How can I assign a velocity along one direction to CO2 molecules in a molecular dynamics simulation using GROMACS?

Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...

26 February 2021 10,014 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

CGA 300 Regulator for CO2 cylinder?

Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...

25 February 2021 3,292 3 View

Muhammad Asim Khan

Dear Amir Irandoust ,

You should read some articles about graphen and g-C3N4. Both have specific structure and specific elemental ratios.

You can read following articles

Article Synthesis of Environmentally Encouraged, Highly Robust pollu...

Article Easily and Synchronously Ameliorating Charge Separation and ...

Amir Irandoust

Dear Asim Khan,

I guess I didn't ask my question clearly. I want to synthesize g-C3N4 network (as a support) through a route involving graphene/graphite and also nitrogen-containing precursors like; amines, N-oxides, nitric/nitro acid, etc. to be used. I want graphene/graphite to be certainly used as one of the precursors (and of course a suitable nitrogen-based precursor should be present). That's what I seek for.

Regards

https://pubs.acs.org/doi/abs/10.1021/nn901850u

https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.200901285

http://pubs.rsc.org/-/content/articlehtml/2011/ee/c0ee00326c

Above articles are about nitrogen doped grephene. may helpful for you