What is the difference between the charge transport in thin film and in nano-particles?

Dear colleagues I would like to ask about the charge transport between carriers in thin film and in nano-particles, what is the difference between them? Would you please provide me with the theory...

09 October 2017 7,428 4 View

Is Williamson-Hall method applied on powder only or can be applied on thin film also?

Williamson-Hall method

09 October 2016 1,777 35 View

What is the relation between crystalline size and the resistance during annealing thin film?

When annealing thin film at constant temperature for different times, the crystalline size (D) decreased and also the resistance (R) decreased. Both parameters lead to increase the sensitivity...

09 October 2016 2,282 14 View

What will happen when increase the concentration of S in the CuS thin film?

We have CuS thin film with (Cu:S) molar ratio (1:1), and we got nanoplates and very distinct and clear particles on the surface. But when increase S concentration (1:2) and (1:3) for (0.1 M, 0.2 M...

01 January 1970 9,130 15 View

Which is higher surface-to-volume ratio, nanoplates or nanorods?

Dear Researchers, Merry Christmas & Happy New Year I would like to ask about the surface-to-volume ratio of nanoplates and nanorods, which one is higher? Regards Fayroz A.Sabah

01 January 1970 9,373 2 View

Hydrophilic of thin film

01 January 1970 8,951 8 View

What is the effect of impurities in the thin film?

01 January 1970 7,447 10 View

What is (x) in CuxS means?

Dear colleagues Greetings CuxS has at least five stable phases with (1

01 January 1970 2,666 4 View

What is the (d spacing), obtained from XRD measurement?

Dear Colleagues Good day I would like to ask about the parameter (dhkl spacing) that we obtained from the XRD data, is it the spacing between grains or particles or atoms? And are the particle and...

01 January 1970 4,531 9 View

What is the surface site density (Ns)?

Dear colleagues Sweet greetings In pH sensor application, the sensing characteristics depend basically on the surface site density (NS), I want to know what are these sites represent? Are they the...

01 January 1970 9,769 1 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View