Dear friends,
I want to know the exact composition of material to be coated in lithium ion battery electrodes.
Hi friends, I want to know about how much time requires to dry the coated electrodes to get crack free coatings Regards, Jegatheesh
09 October 2018 9,033 0 View
Hi friends, I want to know the composition of materials present using XRD instrument. Can you help me with an example or by some formula? Regards, Jegatheesh
09 October 2018 5,730 0 View
Dear all, I want to know the exact composition of active material,Binder and solvent used for coating in both electrodes.can anyone help me to provide some valuable answers?
07 August 2018 6,628 0 View
can anyone help me to give how much specific gravity of H2So4 acid required to form a gel and tell me the ratio of silica in acid?how much composition?
07 August 2018 1,215 0 View
Dear sir, i am working in lithium ion battery.I want to optimize the active material in coating.could you please provide the valuable answer to my question?
01 January 1970 5,087 6 View
I’m trying to reproduce the acousto-optic coupling simulation in the paper Frequency–angular resolving LiDAR using chip-scale acousto-optic beam steering. LNOI(lithium niobate on insulator) is...
13 August 2024 9,795 0 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...
08 August 2024 2,298 0 View
I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...
08 August 2024 8,329 0 View
I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.
07 August 2024 4,526 4 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...
30 July 2024 3,294 3 View
Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...
28 July 2024 8,169 0 View
I'm having problems with ion exchange chromatography. After applying my sample (a fluorescent protein), a preferential path inevitably forms. The matrix I use is DEAE-Sephacel. Could someone...
27 July 2024 6,605 0 View