I want to identify the end group of PEG-b-PHIC in this article.This copolymer was synthesized via coordination polymerization in the presence of TiCl4 as a catalyst, but its end group was not characterized!
see this article
See Fig.2
a-m hexyl isocyanate
b-n ethylene glycol
Best regards.
Hi Mr Tsanov
OH is not end group. Equimolar of Ticl4 and polyethylene glycol was used! What are three peaks from 0.5 to 2 ppm?
The polymer as stated in the article is a polyurethane. These are the 2 end groups:
HO – R’ – OH + OCN – R - NCO ->
I have ChemDraw 22.2.0 and I want to draw PC70BM but I just found C60 and less in the templates so, any one can help me ?
18 June 2024 3,098 3 View
After purifying Laccase enzyme (Bacterial origin), I tried performing enzyme assay using ABTS which is a known substrate. Still I am unable to validate its activity using the said substrate....
21 January 2024 5,159 0 View
Can storing PBMCs at -70°C for a long time affect the population of PBMCs?
15 January 2024 8,010 3 View
What is the method of measuring sulfur for minerals such as metal oxide or molybdenum oxide through Leco furnace (or similar furnaces) at different temperatures, times and weights after leaching...
11 November 2023 3,345 2 View
Hi y'all, I am running into some difficulties with qPCR (SYBR). To give y'all a brief background summary, I transfected some cells (ASO) and am running qPCR to see its effect on known genes using...
08 November 2023 9,775 6 View
Dear all, I am running an RNAscope experiment on human fetal spinal cord sections, roughly gestational week 15. After running my latest round of experiments, I've noticed a brown/bronze tint on...
24 August 2023 3,876 0 View
Hey I would be happy to receive help and guidance on a research question about the nymphs and the final solution. Is the extermination of the Jews, the "Final Solution" part of the Nazi ideology?...
05 August 2023 1,157 3 View
cytotoxicity test
30 July 2023 1,006 1 View
Fig.1 in the attached files shows a typical case of the joint stiffness constant case. In this case, the external loads are applied to the plate, normally named as member. Normally the bolt load...
18 May 2023 6,428 0 View
Hello I want to design a riblet hybrid coupler (Short Slot Hybrid Coupler) in X-band. 1- What should be the length of the couple region, the distance between the two common walls? 2- What...
17 March 2023 6,712 3 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...
08 August 2024 4,842 0 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,989 3 View
is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it
06 August 2024 947 1 View
Metal-containing heterogeneous catalysts often need to be calcined before reduction, so what are some examples of catalysts that perform better without calcination? What is the reason and how many...
05 August 2024 909 2 View
Hello everyone, I am try to understand the differences interaction between insoluble and soluble polymers in water with metal ions and how theit charge density (of metal ions) affect the interaction.
29 July 2024 6,350 3 View
If the pairs are similar, will it reduce the adhesion due to electric charges?
29 July 2024 3,185 2 View
I have different polymer solutions and I hypothesize that water molecules are retained based on the water-polymer interactions, so the amount of free water is less to intercat with drug tablet....
28 July 2024 9,545 6 View
FYI Catalyst is MFI zeolite Si/Al = 140,25.40.11.5,15 I am using this catalyst to study methanol to DME conversion
25 July 2024 2,486 2 View
I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...
21 July 2024 1,559 1 View