Can anyone suggest some papers on non-equilibrium solidification of hypo-eutectic Al-Si alloys?

04 April 2014 0 3K Report

I am working on hypo-eutectic Al-Si alloys cast by the rapid slurry formation (RSF) process. In this process the alloy will be in the semi-solid state.

Badges
Science topic

More Robin Gupta's questions See All

How the formation of eutectic Si takes place in the Rheometal process ?

In the rheometal process when stirring of the liquid using EEM at different stirring speed is carried out. During the stirring the slurry formation takes place within 30 seconds and water...

01 February 2017 8,885 7 View

Any advice on the thermal analysis of A356 alloy with grain refiner?

I am working on Rheocasting study of Al alloy in Rapid Slurry Formation (RSF) process. In this process stirring of the alloy is carried out with the help of stirrer of same metal like melt. But...

11 December 2015 2,380 1 View

Can somebody tell me why, when we carried out stirring at 1000rpm or above, did the material's temp decrease to 577 degree C?

I had tried many time to cast Al-7Si alloys through the rapid slurry formation (RSF) process at different rpm e.g. 400, 600, 800, 1000, 1200, 1400 rpm. At low shear rate 400-800, the temperature...

03 April 2014 6,654 1 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

I have get this error when i calculated the geometrical optimization for prco3, it takes 12 hours until gives this message in the outputfile?

Fatal error in MPI_Allreduce: Other MPI error, error stack: MPI_Allreduce(1628)......: MPI_Allreduce(sbuf=000002459254A180, rbuf=000002459F86A140, count=4851, MPI_DOUBLE_COMPLEX, MPI_SUM,...

09 August 2024 7,615 1 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

Is there anyone with experience in TEM analysis who can assist with a manuscript for an upcoming journal?

Hello dear colleagues, We have prepared a manuscript on NiTi-based alloys and are seeking a second opinion on our current TEM results. If you are a Ph.D. holder with experience in TEM and have...

07 August 2024 9,563 0 View