1. It would be better if the paper describes in detail about the modeling and simulation of all-electric ship(AES) loads (normal load as well as pulsed load).
2. What other software are usually used for AES system modeling and dynamics computation?( I am using MATLAB and Simulation)
3. It would be better if the paper is highly focused on power electronics system modeling and control used in the AES MVDC architecture.
5. Breaker-less and Superconducting DC systems would also do.
4. To be more specific, i want to integrate the PV system in the generation system (that demands for energy storage), so can anyone suggest me the similar type of project ongoing.
I would suggest to have a look at publications of dr. Jing Sun of NAME, University of Michigan, see also http://umich.edu/~racelab/publications.html.
I wonder why you want to integrate a PV system (Low Voltage DC) into a MVDC? I presume you mean a DC system with a voltage between 3.3 and 10 kV.
First of all i would like to thank you for answering and providing the valuable link about my research.
As per my knowledge, according to IEEE recommendation 1kV to 35 kV falls under Medium-voltage DC power system in all electric ship(AES) system. For my particular case i am considering 6 kV dc link MVDC bus. Considering PV system, i want to use this PV system for hot energy storage purpose(for air conditioning system). I guess, combining several PV strings in series we can get the desired dc link voltage .
Furthermore, i will be very glad for your valuable suggestion and your experience based recommendation as i am just in the starting phase of this project.
- Badges
- Science topic