Hello Everyone!!
Hope everyone is safe in this era of Corona Virus and taking proper precautions to fight against the pandemic.
Let me come to my question. I need hydraulic pump which is to be used in scrap shearing machine to apply 30 MPa pressure on the scrap to be sheared. For this, I need to pump fluid at pressure 3000 psi and flow rate around 250 litre per minute.
Please help me in selecting the best pump for my purpose.
With many thanks.
Vipesh
Well,
https://www.expo21xx.com/fluid21xx/14605_st2_hydraulic-pump/default.htm
Regards
Well then,
try these free sources under https://www.wlw.de/en/home
if needed, you can ask a professional market research provider, such as FBC in Frankfurt/Germany:
https://fbc.de/en/
I am not related to them any more, so I do not get paid for recommending them, which I do anyway.
Best regards,
Carsten Dietsche
V250 DIRECTIONAL CONTROL VALVE
Take control with Muncie Power Products’ V250 directional control valve. The V250 is constructed with high grade iron castings and nickel-plated or hard chrome spools for use in high pressure applications and can be configured with many different spool, control and positioner options. The V250 is designed for flow rates up to 75 GPM (280 LPM), and offers superior performance in a compact package. Muncie Power Products takes pride in supplying the highest quality products along with outstanding service and support.
Flow Capacity (Nominal)
67 GPM (250 LPM)
Flow Capacity (Maximum)
75 GPM (280 LPM)
Max Pressure
4,000 PSI (275 BAR)
MSV SERIES SELECTOR VALVE
The two position, two way valve provides a simple means of directing oil flow into two separate hydraulic circuits or can be used as a low pressure bypass back to the reservoir.
Flow Capacity (Nominal)
60 GPM (227 LPM)
Max Pressure
3,500 PSI NPT, 3,000 PSI ODT
PILOT OPERATED RELIEF VALVES
Pilot operated relief valves provide maximum system pressure protection, even with widely varying flow rates.
Flow Capacity (Maximum)
30-60 GPM (114-227 LPM)
Max Pressure
3,000 PSI (207 BAR)
Dear Vipesh Singh, dear collegues,
In reply to Ashok Kumar Singh's proposal I remember that there was an engineering project with similar aims. I have to add that you can contact my Indian collegues for a complete engineering solution for such a pump plus its controls at:
SAMSON CONTROLS PVT. LTD.
D-281, MIDC Ranjangaon, Taluka Shirur District Pune 412220, Maharashtra
+91 2138 665600 +91 2138 665666 [email protected]
This means that I recommend third parties' pumps plus inhouse accessories as a possible package solution.
I do not advertise a certain pump, as the fluid to be pumped needs to be specified in detail. A materials selection is then based on further information (corrosion, physical properties, resistance against chemicals, and so on).
Since my employer SAMSON does not produce pumps, I do not see a conflict of interests when replying in such a rather direct manner.
I keep my fingers crossed for you to find a an economically sound long-term solution.
Best regards, Carsten Dietsche,
Environmental Engineer
Thank you once again Carsten Dietsche for your information. I will look into it
- Badges
- Science topic