Hello everyone,
Can anyone please suggest me a good textbook/source that discusses porosity and inclusions of metals or aluminium?
I am struggling to find one.
Appreciate your time
Mohammed
You mean porosity as a defect like casting defects?
There you may read the ASM handbook Vol 15 and Castings Practice: The Ten Rules of Castings 1(by John Campbell).
Thank you guys !
I mean porosity as a defect of the manufacturing method and the means of measuring it ...etc.
Hi Mohammed,
See my article in Research Gate:
Edward Czekaj, Stanisław Pysz
The application of a computer technique
to assess the impact of chemical composition
on dispersed shrinkage microporosity
of hypoeutectic cast silumins
Sincerely
Edward Czekaj
Hi Dear
this is your papers need as you want, please read them and give me feedback
best regards
Hi, Raghd Muhi Al-Deen Jassim ,
Look please our article:
Edward Czekaj, Stanisław Pysz
The application of a computer technique to assess the impact of chemical composition on dispersed shrinkage microporosity of hypoeutectic cast silumins (20) (PDF)
Metallurgy and Foundry Engineering – Vol. 40, 2014, No. 3, pp. 125–140 http://dx.doi.org/10.7494/mafe.2014.40.3.125
https://www.researchgate.net/publication/287930660_
Vide especialy References, especially [17] Korol'kov A.M. Usadochnye yavleniya (1957).
Sincerely
Edward Czekaj
Dear Muhammad,
Refer the site give below. Here you will get good detail about metal porosity.
1.https://scholarworks.uni.edu/cgi/viewcontent.cgi?article=1227&context=etd(91 pages) Brodie J. Biersner , 2015
2.https://www.tousimis.com/applications/whitePapers/PDF/Ultra-High%20Porosity%20in%20Metal-Organic%20Frameworks.pdf
Ultra-High Porosity in Metal-Organic Frameworks Hiroyasu Furukawa, Nakeun Ko, Yong Bok Go, Naoki Aratani, Sang Beom Choi, Eunwoo Choi, A. Özgür Yazaydin, Randall Q. Snurr, Michael O’Keeffe, Jaheon Kim,* Omar M. Yaghi*
(6 2 pages)
3.http://yaghi.berkeley.edu/pdfPublications/Izatt_c09.pdf
Porosity in Metal–Organic Compounds Alexander Schoedel1,2,3 and Omar M. Yaghi1,2,3,4 1Department of Chemistry, University of California, Berkeley, CA, USA 2Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA, USA 3Kavli Energy Nanoscience Institute, Berkeley, CA, USA 4King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia 9.1 Introduction FINAL 9 Alexander Schoedel1,2,3 and Omar M. Yaghi1,2,3,4
4. The Group 13 Metals Aluminium, Gallium, Indium and Thallium: Chemical Patterns and Peculiarities
Editors SIMON ALDRIDGE Inorganic Chemistry Laboratory, University of Oxford, Oxford, UK ANTHONY J. DOWNS Inorganic Chemistry Laboratory, University of Oxford, Oxford, UK
(743 Page- Textbook)
Here you can see plenty of details for 13 metals.
Hope reference content is helpful for you.
Ashish
- Badges
- Science topic
- Similar topics
- Engineering
- Materials Engineering
- Annealing
- Metallurgy
- Metals