In sequentially coupled thermo-mechanical analysis, first step to conduct transient thermal analysis to find the thermal histories. In the second step these temperature results are input for mechanical analysis to find displacements and stresses.
Now,I have completed transient thermal analysis using ANSYS (APDL). Next I wish to conduct transient mechanical analysis. Pls can any one help me to suggest suitable command for the same?
Hello, Mr. Venkat Kumar. Let me post the first answer, although I am not familar with thermo-mechanical by Ansys. I can give you a link which explain the APDL procedures of sequencially coupled analysis. Unforturnately, it is written in Chinese. The key step is something like:
*DO,I,1,50
LDREAD,TEMP,,,0.2*I,0,'g34','rth',' ' !Read the temperature file as thermal load
OUTRES,ALL,ALL,
TIME,0.2*I
DELTIM,0.2,0.075,0.2,1
SOLVE
*ENDDO
Here is the link: http://emuch.net/html/201311/6668759.html
Hopefully, this would be useful to you.
Hello, Mr. Venkat Kumar. Let me post the first answer, although I am not familar with thermo-mechanical by Ansys. I can give you a link which explain the APDL procedures of sequencially coupled analysis. Unforturnately, it is written in Chinese. The key step is something like:
*DO,I,1,50
LDREAD,TEMP,,,0.2*I,0,'g34','rth',' ' !Read the temperature file as thermal load
OUTRES,ALL,ALL,
TIME,0.2*I
DELTIM,0.2,0.075,0.2,1
SOLVE
*ENDDO
Here is the link: http://emuch.net/html/201311/6668759.html
Hopefully, this would be useful to you.
Hello Venkatkumar you could solve your problem? I have the same difficulty.
hello vemkatkumar,
please tell me how to solve therma analysis. i am facing the antype problem in thermal transient analysis. please help me out.
- Badges
- Science topic