Can any one suggest me electron flow from sticked solar cell electrode to FTO substrate ?

Poshan kumar reddy Kuppam @Poshan_Kumar_Reddy_Kuppam

11 November 2018 0 6K Report

recently i am trying to do solar cell based water splitting experiment .i am using p-type based substrate .Due to limited size of solar cell . i need to stick solar cell to FTO substate .solar cell has electrodes which will touch FTO substrate and this will act as working electrode(electron transport layer) .if i stick solar cell to FTO is there any effect on performance ..

Badges
Science topic

More Poshan kumar reddy Kuppam's questions See All

Why i am not able to see photoluminescence signal using transfered MoS2 on to the FTO substrate?

i transfered mos2 on to the FTO substrate .when i check XRD and Raman i got cleared peaks where as in photoluminescence i did not get any peaks may i know what is main reason ?

08 September 2019 7,244 2 View

Can any one suggest why Mo(molybdenum) metal work better for oxygen evolution?

I saw some publication where Mo with different alloys are good for HER or OER ..? in my case with bare Mo substrate we are getting a better result ? is there any reason special reason like it...

02 March 2019 2,665 5 View

What are different ways to make Titanium nitride thinfilm into nanoparticles ?

Can any one suggest me is it possible to make 10 nm Titanium nitride thinfilm into nano particles or nano islands using annealing process at lower temperature or please suggest me any route to do...

01 February 2019 6,705 4 View

Is it possible to transfer a 50nm metal oxide loaded on graphene to nickel foil ?

Can any one suggest me .how to transfer 50nm deposited metal oxide( example wo3 ) on graphene from foil to another foil without damaging metal oxide

11 December 2018 3,089 3 View

Can any one suggest best ohmic contact for P-Ge?

I am working on III-V junction solar cell based water splitting .in my case i don't want to use noble metals as a back electrode(ohmic contact ) .can any one suggest me best earth abundant...

09 October 2018 8,838 4 View

How to find perfect thickness of a semiconductor for maximum absorption in photoelectrochemical cells ?

I want to deposit Al203 on SI and FTO substrates .is there any way to find perfect thickness of the Al203 for maximum absorption on SI and FTO in case of photoelectrochemical cells

05 June 2018 1,639 5 View

Why in photoelectrochemical cells P type silicon is thicker and N-type material is in nanometer is it because of diffusion ?

I read many papers recently related to photoelectrochemical cell papers on P-type silicon substrtate they had grown on n-type SrTio3 or Al203 below 10 nanometers.the Papers are suggesting to...

03 April 2018 6,561 3 View

How to control formation of sio2 on SI ?

I am trying to deposit a semiconductor layer on silicon by mocvd and sputtering.the main problem for my experiment is formation of sio2 .how to control the formation of sio2 .? In both techniques

03 April 2018 6,213 1 View

What is main difference between deep donor,deep traps and shallow donor ?

genearlly in metal oxides there will be formation of oxygen vacancies which act as deep donor.some publication suggest to add shallow donor to overcome this issue .? may i know what is the main...

31 December 2017 3,608 2 View

Why seed layers are used for gas sensors ?

I saw in some publications .they will grow a seed layer on the top of si/sio2 .example si /sio2 / zno seed layer /sno2 nano wires for No2 application . As per my knowledge zno is good for No2...

10 November 2017 1,189 2 View

Why does blocking with my immunogenic peptide cause nuclear fluorescence in ICC?

Hi all, I am validating a polyclonal antibody raised against human ANT4, through WB and ICC. In most of my controls, the antibody shows very little off-target binding, but when I pre-incubate the...

03 March 2021 5,999 3 View

Does any one know how i can prepare liver tissue with transmission electron microscope with good fixation?

i have problem in preparation of liver tissue with bad cell organelles and how i can adjust osmolarity

03 March 2021 8,890 1 View

Irradiation data for JAPAN?

Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...

03 March 2021 961 3 View

I need to image mesoporous silica nanoparticles that are in ~100 nm size and do high resolution TEM to look at mesopores. what grids should I use?

Need to image mesoporous silica nanoparticles using the TEM. Also, need high resolution TEM images to see the mesoporous structure. Kindly suggest what kind of grids to use. Thanks, Shatadru

02 March 2021 1,787 2 View

Have someone successfully used the ER alpha (Santa Cruz sc-8002) antibody in immunostaining ?

Santa Cruz now recommends this new antibody (F-10) but I can't find a publication using this reference. I'm working on human et non human primate hypothalamus and so far, it doesn't work. Is...

02 March 2021 10,003 2 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Does Napabucasin soluble in dichloromethane and in ethanol?

I need to prepare a solution of Napabucasin (inhibitor of cancer cell stemness) in dichloromethane. The drug is expensive, so maybe somebody already tried to do it. If it is soluble, what is the...

02 March 2021 9,945 3 View

Help request in CST microwave?

im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...

02 March 2021 2,246 2 View

Shall I skip the measurement model in SmartPLS?

Hello everyone, I had run a mediation model in SmartPLS using questionnaires that were already validated among my statistical population. A professor who edited my paper -though she is not...

01 March 2021 3,052 3 View

Energy minimization in LAMMPS using NVT ?

How do I do energy minimization in lammps with NVT ensemble ? I am using the following command and it does not seem to work. It stops at extremely high energy and gives me the error zero search...

01 March 2021 2,294 3 View