Can any one share the .par file for a 2D material in Sentaurus SDevice?

14 June 2025 0 476 Report

I am trying to create a .par file for a 2D material. However, I am not aware of the format or the parameters that must be included.

Badges
Science topic

More Nihal Narra's questions See All

How to carry out Raman on a CVD prepared material?

I have a CVD-prepared material. The problem is that the LASER covers a smaller area than the islands, so I see localized effects. Sometimes, the intensity of the silicon peak is larger than the...

05 June 2024 6,797 3 View

Which species of macro fungi is this?

It was found growing in the root zone of coconut tree, it was small in size, decurrent gills, the weather was humid, location was northern bangladesh

22 May 2024 9,339 0 View

How to define fiber orientation for a give composite part?

Greetings, Hello everyone, I designed a boat hull in Catia V5. I want to define ply sequence and direction for that structure. I did lots of research but I couldn't find the appropriate solution...

05 August 2023 5,864 2 View

Something wrong with CHELSA LGM bioclimatic variables?

Hello, I use CHELSA v2.1 current, future (MPI-ESM1-2-HR/ and MRI-ESM2-0/), and LGM bioclimatic variables for SDM. However, when I look at LGM (MPI-M_MPI-ESM-P/ and MRI_MRI-CGCM3/) variables in...

12 July 2023 3,825 2 View

I did the creep analysis in Ansys workbench for 1000hours, but am getting the very less deformation, can someone help me to sort it out?

Also, I do not have any errors while solving the simulation.

29 May 2023 5,507 0 View

How to give an polynomial expression for a temperature in Ansys workbench?

Actually I want to do a Creep for a Cyclic temperature, Iam unable to give it. Can someone help me with this? Thanks in advance!

21 May 2023 4,838 4 View

How can i make a transient analysis for 200 time steps in Ansys Workbench?

I want to make a simulation for 200 steps, but I do not know how to do it. Can anyone help me? Thanks in advance!

21 May 2023 5,728 2 View

How can i use Auto time stepping in Ansys Workbench?

I want to make a simulation for 400 time steps, how can I give in Ansys Workbench?

21 May 2023 5,566 4 View

Graphitic carbon nitride is a p type or n type semiconductor in intrinsic form?

While performing sensing pf acetone i got increase in resistance with introduction of acetone over pure gCN but when i decorated pristine gCN with transition metals (Ni, Pd, Pt, Cu, Ag, Au) i got...

21 August 2022 6,252 0 View

How to use Langmuir and Freundlich Isotherm model to analyse biosorption by mycelial biomass using Atomic Absorption spectrophotometer?

I have no prior experience in Langmuir and Freundlich isotherm model utilization in data anlysis. Kindly, If anyone could explain from the basic I will be extremely grateful.

25 March 2022 2,665 5 View

I have get this error when i calculated the geometrical optimization for prco3, it takes 12 hours until gives this message in the outputfile?

Fatal error in MPI_Allreduce: Other MPI error, error stack: MPI_Allreduce(1628)......: MPI_Allreduce(sbuf=000002459254A180, rbuf=000002459F86A140, count=4851, MPI_DOUBLE_COMPLEX, MPI_SUM,...

09 August 2024 7,615 1 View

What is the prepared reference material that can be used in inductively coupled plasma optical emission spectrometry (ICP-OES) to measure REE and U ?

What is the prepared reference material that can be used in the ICPE-9820 Shimadzu Japan instrument, which employs inductively coupled plasma optical emission spectrometry (ICP-OES) to measure...

06 August 2024 1,896 1 View

How effective is the Citi Bloc standard basket in enhancing the accuracy and comparability of international construction cost assessments?

Citi BLOC Standard Basket Definitions: A standardized unit representing a fixed basket of construction materials, labor, and equipment costs priced in various cities. Purpose: To create a common...

04 August 2024 8,997 1 View

May I know the exact Quartile of the journal- Advanced Engineering Materials (Wiley) for material science category?

In some data sources it has been grouped in Q1 and some shows it is Q2.

29 July 2024 4,227 2 View

Can we eliminate the stress singularity at the tip of the crack by manipulating the elastic constants?

The aim of the research here is to prevent the propagation of the crack in the fabricated elastic medium with useful applications.

25 July 2024 9,976 3 View

How can i solve the code problem in Sentaurus TCAD?

Currently, I have created a gate-all-around process using sentaurus tcad and I am trying to measure the noise using the cmos noise code. However, an error occurred during the simulation. The error...

24 July 2024 6,352 0 View

Wrong out put for gmx x2top?

Dear users, I would like to simulate a zeolite structure in gromacs. I got the .cif file from IZA expanded in one direction in Materials Studio and exported a .pdb file. However, when I want to...

24 July 2024 367 4 View

What binder would be the best choice to modify glassy carbon electrode with a 2D Material like Graphene or MXene?

I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?

23 July 2024 5,776 2 View

Is there a good macro photography kit for on-site metallurgical investigation?

I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...

22 July 2024 3,490 2 View

How to cacualte the creep life of polycrystal with CPFEM?

I saw a paper(PHAN V-T, ZHANG X, LI Y, et al. Microscale modeling of creep deformation and rupture in Nickel-based superalloy IN 617 at high temperature [J]. Mechanics of Materials, 2017, 114:...

16 July 2024 8,436 0 View