does presence of water in 38% acid makes any differences?
temperature is the same.
38% water containing hydrochloric acid will be more corrosive as the presence of water makes faster to react with metals by acid.
there is portable carbon steel container of 98% H2SO4 at 90°C. what is an appropriate coating or lining for prevention corrosion in this case? what do you think about rubber lining? also vapor of...
05 June 2019 1,984 4 View
there is an extractive metallurgy reactor and its core is in 1000°C. there is some heat supplying flames around the core and i want to apply refractory materials around them for the purpose of...
05 June 2019 9,321 4 View
Im interested into spark plasma sintering of tungsten carbide powders an production of different segments via this. its gonna be my PhD thesis subject so it has to have innovation and should be on...
04 May 2019 5,227 1 View
cladding or lining or coating or .....
03 April 2019 9,849 6 View
a complete book or review paper on carbon and graphite.
03 April 2019 6,926 4 View
what are the forming and shaping methods of graphite and also fused quartz powder?
01 February 2019 7,619 3 View
Can it resist dry HCl at 60 °C ?
09 October 2018 3,397 2 View
Im confused because some references take anhydrous hydrogen chloride as a corrosive gas but some of them take it neutral. if it is corrosive, what materials can resist high temperature corrosion...
09 October 2018 4,285 8 View
what is the right monomer? particle size of powder?
08 September 2018 4,740 2 View
does it gel automatically after mixing with water and ceramic powder?
08 September 2018 6,433 0 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
I am trying to recover liquid CO2 from a mixture of 0.6 CO2, 0.3 N2, and 0.1 O2. My aim is to recover about 99% liquid CO2 at the bottom of the column and make sure the amount of gaseous CO2...
06 August 2024 4,611 0 View
I have prepared a liquid broth containing Yeast (S. Cerevisiae) that i need to add from it to fermentation media of lignocellulosic hydrolysate. I need to know based on what parameters do we add...
06 August 2024 662 1 View
Palmitic acid presence in aqueous fraction
05 August 2024 8,624 4 View
Dear readers, Thanks for your attention. I am wondering about the health economic problem of quantifying the value of interventions which a) prevent, b) improve symptom profile and c) ultimately...
05 August 2024 3,246 1 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,186 6 View
What is the best way to freeze the rat brain - liquid nitrogen, Dry ice , isopentane - after isolation for later protein investigation by Elisa?
01 August 2024 1,722 1 View
I am attempting to conjugate PEG to an amino acid at the C-terminus, for the purposes of producing nanoparticles. I have been told that PEG modified with amine groups can be used for this purpose,...
31 July 2024 2,033 1 View
I am currently working on a project involving liposomes and need to determine the maximum volume of siRNA that can be added to a 2.5 mL liposome solution with a total lipid concentration of 10...
30 July 2024 6,420 1 View