Are there any estimation methods to identify +1 state for Metals?

More Kanniah RajKumar's questions See All

Does anyone know, any conference related to "mathematical data compression" topic?

Please suggest me, I want to present my research work.

13 July 2024 1,461 1 View

Study of interaction of Polymer iodine complex computationally?

How can I study the interaction between polymer (eg PVA) and iodine computationally?

15 April 2024 3,231 2 View

How to perform DFT on samples with fractional stoichiometry?

For the purpose of theoretically studying my samples (Lithium ferrite) which are already prepared. I would like perform DFT. The problem I face here is that my samples have formulas like for...

13 February 2024 6,053 3 View

Which magnets can be used for measurement of Curie Temperature?

I have ferrite samples with Curie Temperature of about 600°C, unfortunately the Magnet that came along with the instrument isn't working and it has demagnetized due to high temperature. Which type...

05 October 2023 3,060 3 View

How to confirm biotinlyation of Avi tagged antibody?

I completed the biotinylation of purified antibody with an Avi tag. I did a WB but was unable to detect the presence of biotin in the sample. Used Streptavidin HRP conjugate as the secondary...

09 January 2023 1,098 4 View

Any other photocatalytic concept is used in the photocatalyst sheet other than Z- scheme?

Sir/Madam, As per Overall Water Splitting (OWS) discussion: Mostly, Z-scheme concept is utilized in the photocatalyst sheet applications. Is there any other photocatalyst concept (such like...

04 January 2023 9,983 2 View

What is the role of SPACE in the hydrogen production?

In the hydrogen production Example: In Water: commercial/distilled water/ seawater is the various one. In Materials: bio-materials/ inorganic materials is used for...

27 October 2022 3,027 0 View

Is the research in fading channels under Wireless communication (Electronics and Communication Engg) are limited or not?

What are the areas in fading channels like TWDP,Rayleigh fading Channel,Nakagami fading Channels?? ....Is pursuing research in this area are limited?Is there is a chance of publishing many papers...

25 February 2022 8,382 9 View

How to use Particle Swarm Optimization as optimizer during training of Autoencoder?

model.compile(loss='msle', metrics=['accuracy'], optimizer=PSO), i have used like this but, ValueError: Could not interpret optimizer identifier:

05 January 2022 7,791 4 View

Is it mandatory to wear the mask even while struggling to breathe and die eventually ?

In a video, I found a lady struggling to breathe at the entrance of the hospital and put on hold due to lack of availability of beds. She was apparently "Paradoxically breathing" with increased...

18 April 2021 6,630 0 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

Which type of compound does lamda max of 218 indicate in a uv-vis spectrum of a partially purified compound through column and TLC?

A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...

11 August 2024 9,801 2 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Why might the impedance values for DI water and 0.1X PBS buffer solution exhibit a decreasing and increasing trend, respectively over time (HP 4194A)?

Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...

05 August 2024 3,783 2 View

What is meant by baseline of FTIR data?

I got comment on my FTIR data figure from a reviewer. The reviewer said "FTIR data in Figure should be repeated. there is no bassline." I made Y off set comparison graph of FTIR on OriginLab. Can...

03 August 2024 6,070 3 View

How can I find access to heavy metal reference doses from the EPA and WHO websites?

Reference dose and Maximum acceptable concentrations HMs

03 August 2024 8,230 4 View

Where can I find free research instruments for Nursing?

for eg. transition shock scale

01 August 2024 5,998 0 View

Can a Conventional 50W visible LED Lamp Emit UV Light?

I'm researching light sources and their UV emissions. I'm curious if a 50W, 7500K conventional LED lamp emits any UV light. I found that a 200W tungsten lamp can emit up to 1.5 mW/cm² at 350 nm....

31 July 2024 3,843 7 View

Mossbauer spectroscopy Co0.6Mn0.4Fe2O4 MNPs?

Following curve related to Co0.6Mn0.4Fe2O4 Magnetic nanoparticles with extra phase a-Fe2O3. I will appreciate to help me to interpretation this spectroscopy, especially the blue line.

31 July 2024 9,140 2 View

Simulation of metal drawing by Abaqus with UMAT?

Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...

30 July 2024 7,062 1 View

Meera M.G.

Hi Raj Kumar, you can perform cyclic voltammetry for your samples and identify whether the metal exists in +1 oxidation state. You can further relate the oxidation or reduction potential obtained from these studies with the electrochemical series.

Dr. Arun KP

XPS will help you

Kanniah RajKumar

Of course, XPS is best for ever. Is there any another methods by simple instrumentation like CV, spectroscopy methods