30 October 2022 1 8K Report

we will be using this software for our study

More Johanna Mae Ga's questions See All
What factors could be contributing on low tumor take in female Nude mice?

Hello everyone, I'm working with a PA-1 ovarian cancer cell line xenograft model in female nude mice. My cells are at 372 passages, the cell repository bank themselves gave at 352th passage....

05 July 2024 5,860 1 View

Why nuclease free water is preferred to use in preforming PCR rather than TE buffer?

What component or agent can the TE buffer contribute to having an unsuccessful PCR result

12 June 2024 6,574 7 View

Is there a study on the LCA of Kapton/Polyimide available?

As Kapton is one of the predominantly used substrates in printed electronics applications I was wondering if there is a study on the LCA of Kapton/Polyimide available? At least considering the raw...

21 May 2024 7,402 0 View

Why can't the lactate dehydrogenase test be run in the majority of clinical chemistry tests in the use of lithium heparinized plasma tubes?

According to the study "The transition from gel separatory serum tubes to lithium heparin gel tubes in the clinical laboratory", most clinical chemistry and immunoassay tests can be performed...

09 April 2024 6,395 1 View

What are the factors that make lithium heparinized plasma (LIH) tubes more viable for use in clinical laboratories?

The journal "The transition from gel separatory serum tubes to lithium heparin gel tubes in the clinical laboratory" aims to assess the viability of replacing serum with plasma samples in...

08 April 2024 3,341 3 View

How do variations in the quality of Hepatitis D test kits impact accuracy and reliability of data about Hep D prevalence and transmission patterns?

In a study titled "Diagnostic Efficacy of Serological Antibody Detection Tests for Hepatitis Delta Virus: A Systematic Review and Meta-Analysis" by Zhenzhen et al., findings indicate that although...

08 April 2024 1,247 1 View

Give a Research Design about Research entitled Sustainable Sculpture Buttoned Up Recycled Pots as Living Art Installation?

overall strategy and analytical approach that you have chosen in order to integrate, in a coherent and logical way, the different components of the study, thus ensuring that the research problem...

01 April 2024 9,676 1 View

What steps should be taken to encourage primary care physicians in local communities to access national databases for antibiotic resistance?

This question is posted as it was stated in the study "Diagnostic Microbiology from the Beginning to the Future: Regional Antibiograms as Public Health Tools to Slow Down Antibiotic Resistance"...

05 February 2024 3,038 2 View

What are strategic challenges for insurance companies against the backdrop of digitalization?

What are the biggest strategic challenges that insurance companies are facing as a result of digitalisation?

19 November 2023 2,728 5 View

What are the specific processes that I will follow in my research on the exergoeconomic analysis of HVAC system energy consumption in a classroom?

I am conducting an exergoeconomic analysis of HVAC system energy consumption in a classroom, considering three parametric cases: air conditioning only, air conditioning with mechanical...

14 November 2023 133 3 View

Similar questions and discussions
How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

Are air moisture harvesting technologies effective in combating desertification?

Air moisture harvesting Air water collection devices

06 August 2024 5,473 2 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

How can I define dispersion for salt in CMG or Eclipse?

How can I define dispersion for salt in Eclipse in a low salinity water flooding code? how can I active interactions between tracer and polymer in Eclipse? Please let me know if you have any idea.

05 August 2024 1,218 1 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close